摘要
通过理论分析,得到软接触电磁连铸结晶器内部金属液弯月面形状的计算公式,并根据试验结果进行了修正,修正后的公式可较准确地计算两段式无缝结晶器内部金属液的弯月面形状。178mm两段式结晶器内钢液的弯月面形状计算结果表明,弯月面高度随电源功率和上半段电阻率的增加而增大,随电源频率和结晶器壁厚的增加而减小。通过选择合理的电磁参数和结构参数,利用两段式结晶器有实现软接触电磁连铸的可能性。
The equation describing the meniscus shape in two-section slitless mold for soft-contact electromagnetic continuous casting was derived from theoretical analysis.The equation modified by the experimental results can be used to calculate accurately the meniscus shape,and prediction of meniscus shape of liquid steel in mold with 178 mm in diameter by the equation reveal that the height of meniscus is increased with increasing in the power and resistivity of top half of the mold,and it is decreased with increasing in frequency and thickness of the mold.The soft-contact electromagnetic continuous casting can be realized by using rational structural and electromagnetic parameters.
出处
《特种铸造及有色合金》
CAS
CSCD
北大核心
2008年第11期871-874,共4页
Special Casting & Nonferrous Alloys
基金
国家高技术研究发展计划(863计划)资助项目(2001AA337040)
辽宁省科技厅科技攻关项目(2006221007)
沈阳市人才资源开发专项基金资助项目
中国博士后科学基金资助项目
关键词
材料电磁过程
软接触电磁连铸
两段式无缝结晶器
电磁场
弯月面
EPM(Electromagnetic Processing of Materials),Soft-contact Electromagnetic Continuous Casting,Two-section Slitless Mold,Electromagnetic Field,Meniscus
