期刊文献+

闭合场非平衡磁控溅射镀Cr-C层的耐蚀性研究 被引量:1

CORROSION RESISTANCE OF Cr-C COATINGS PREPARED BY CLOSED FIELD UNBALANCED MAGNETRON SPUTTER ION PLATING
下载PDF
导出
摘要 利用闭合场非平衡磁控溅射离子镀技术在高速钢表面制备Cr-C镀层。采用电化学腐蚀法研究了Cr-C镀层、电镀Cr层及高速钢基体的腐蚀行为.结果表明,在1 mol/LNaCl、1 mol/LHCl及7.5 mol/LNaOH溶液中,闭合场非平衡磁控溅射离子镀制备的Cr-C镀层的耐蚀性优于电镀Cr镀层,并且其Cr含量越高耐腐蚀性越好. The Cr-C coating was prepared by means of a closed field unbalanced magnetron sputter ion plating technique on high speed steel. Then the corrosion behavior of the high speed steels without and with the Cr-C coating was studied in 1 mol/L NaCl,1 mol/L HCl and 7.5 mol/L NaOH solutions respectively. For comparison steel samples with an ordinary electroplated Cr coating were also tested. The results showed that the corrosion resistance of Cr-C coating was better than that of Cr coating prepared by electroplating,and the higher the content of Cr in the Cr-C coating,the better the corrosion resistance.
机构地区 西安理工大学
出处 《腐蚀科学与防护技术》 CAS CSCD 北大核心 2008年第6期458-461,共4页 Corrosion Science and Protection Technology
基金 国家863计划(2005AA33H010) 西安理工大学科学研究计划(101-210603)
关键词 磁控溅射离子镀 Cr—C镀层 耐蚀性 magnetron sputtering Cr-C coating corrosion resistance
  • 相关文献

参考文献5

  • 1赵麦群,雷阿丽.金属的腐蚀与防护[M].北京:国防工业出版社,2004.2.
  • 2李金桂,吴再思.防腐蚀表面工程技术[M].北京:化学工业出版社,2002.228~230.
  • 3徐晋勇,杜丽,龙向前,唐万兴,高原,徐重.碳钢表面等离子高Cr合金层耐蚀性能的研究[J].腐蚀科学与防护技术,2006,18(4):306-308. 被引量:4
  • 4李兆泽,徐超,吴学忠,万红,李圣怡.Cr薄膜的沉积与湿法刻蚀工艺研究[J].传感技术学报,2006,19(05A):1437-1440. 被引量:9
  • 5Kelly P J,Amell R D,Ahmed W,et al. Novel engineering coatings produced by closed filed unbalanced magnetron sputtering [J]. Materials & Design,2003,4(17) :215.

二级参考文献15

  • 1郑志霞,冯勇建,张春权.ICP刻蚀技术研究[J].厦门大学学报(自然科学版),2004,43(B08):365-368. 被引量:35
  • 2徐重.双层辉光离子渗金属技术的发展、现状和展望[J].表面工程,1997(1):4-10. 被引量:36
  • 3Xu Zhong.Method and apparatus for introducing normally solid materials into substrae surface[P].UK Patent:No.2150602,1987.
  • 4Xu Zhong.Method and apparatus for introducing normally solid materials into substrae surface[P].Canada Patent:No.1212486,1986.
  • 5Xu Zhong.Method and apparatus for introducing normally solid materials into substrae surface[P].Japan Patent:No.1872305,1986.
  • 6刘永徽.电化学测试技术[J].北京航空学报,1987,(4):63-65.
  • 7Vernon S P , Stearns D G, Rosen B S. Lon-Assisted Sputter Deposition of Molybdenum-Silicon Multilayers[J]. Appl. Opt, 1993 , 32 (34) :6969-6974.
  • 8Allen M. Hermann, Richard Westfall, Rikard Wind. Low-Cost Deposition of Culnse2 (CIS) Films for CdS/CIS Solar Cells[J]. Solar Energy Materials and Solar ells , 1998, (52) :355-360.
  • 9Chen C. Wong , Henry I. Smith and C V Thompson. Surface-Energy-Driven Secondary Grain Growth in Thin Au Films [J].Appl. Phys. Lett, 1986,48 (5) :335-337.
  • 10Habazaki H, Mitsui H, Ito K. Roles of Aluminium and Chromium in Sulfidation and Oxidation of Sputer-Depo-sited Al-and Cr-Refractory Metal Alloys [J]. Corrosion Science,2002, 44 (2): 285-301.

共引文献25

同被引文献9

引证文献1

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部