期刊文献+

气控自动排液系统在天然气集气站的应用 被引量:3

APPLICATION OF AUTOMATIC DRAINAGE SYSTEM BASED ON PNEUMATIC CONTROL OF MAGNETIC INDUCTION AT NATURAL GAS GATHERING STATIONS
下载PDF
导出
摘要 自动排液系统是油气田天然气处理、加工装置的重要辅助设备,其安全性、可靠性和工艺性直接影响到天然气的稳定生产和输送过程。针对目前常见的机械式、电控式和电气联控式自动排液系统的一些缺点,设计了一种气控的自动排液系统。该装置主要由压力气源、磁浮子液位计、磁—气控制装置和气动调节阀等组成。磁浮子液位计安装于分离器积液包上,根据液位计中的磁浮子指示的液位高度,磁—气控制装置把磁信号转换为气控信号,控制气动调节阀在高液位慢速开启,在低液位快速关闭,从而按工艺要求实现压力容器的自动排液。实际应用证明,该系统能够更好地满足天然气生产的自动排液工艺要求,具有控制精度高、安全性好、性能稳定可靠、易于安装维护等特点。 Automatic drainage is an important auxiliary equipment at natural gas gathering station.The steady production and transportation of natural gas is directly affected by drainage's security,reliability and process of technology.To overcome some shortcomings of current common automatic drainage controlled by mechanical or electronic mode,a new automatic drainage system based on pneumatic control is designed.It mainly consists of gas source,magnetic floater liquid level meter,pneumatic controller of magnetic induction,pneumatic control valve.According to the location indicated by liquid level meter,pneumatic controller of magnetic induction convert magnetic level signal to pneumatic control signal,drive pneumatic control valve opens slowly on high level and closes rapidly on low level,so as to drain safely in accordance with the technical requirements.Proven in practical applications,the system can better meet the requirement for the automatic liquid discharge process in natural gas production,with good features like high accuracy,safety,reliability,being easy to install and maintain.
出处 《天然气工业》 EI CAS CSCD 北大核心 2008年第11期109-111,共3页 Natural Gas Industry
基金 四川省科技厅科技支撑计划(编号:07GG008-026)的资助
关键词 排液 自动化系统 液面计 磁感应 气动系统 控制 drainage fluid,automatic system liquid level meter,magnetic induction,pneumatic system,control
  • 相关文献

参考文献3

二级参考文献3

  • 1四川石油管理局.天然气工程手册(下)[M].北京:石油工业出版社,1990.196.
  • 2许文渊 蒋长安.天然气利用手册[M].中国石化出版社,2002,1..
  • 3.天然气疏水阀说明书[Z].,2004-4..

共引文献6

同被引文献9

引证文献3

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部