期刊文献+

配方因素对CR/PU并用胶性能的影响

Effect of formulation factors on properties of CR/PU blend
下载PDF
导出
摘要 研究CR/PU并用比、硫黄用量、炭黑品种和用量及增塑剂品种对CR/PU并用胶物理性能的影响,并确定并用胶优化配方。CR/PU并用胶的优化配方为:CR 80,PU 20,炭黑N220 30,硬脂酸锌1,氧化镁4,古马隆树脂5,硫黄2,促进剂DM 3,促进剂M 3。该配方并用胶的综合物理性能良好。 The influence of the CR/PU blending ratio,the addition level of sulfur, the type and addition level of carbon black and the type of plasticizer on the physical properties of CR/PU blend was investigated,and the optimized formulation of CR/PU blend was established. The optimized formulation of CR/PU blend was as follows:CR 80,PU 20,carbon black N220 30,zinc stearate 1,magnesium oxide 4,coumarone resin 5,sulfur 2,accelerator DM 3,accelerator M 3. This optimized formulation gave the blend better comprehensive physical properties.
出处 《橡胶工业》 CAS 北大核心 2008年第12期730-733,共4页 China Rubber Industry
关键词 CR PU 并用胶 物理性能 CR PU blend physical properties
  • 相关文献

参考文献5

  • 1亢庆卫.氯丁橡胶/氯化丁基橡胶共混物的制备与性能研究[D].广州:华南理工大学,2005.
  • 2Abi Santhosh Aprem,Joseph Kuruvilla, Mathew Thomas, et al. Studies on accelerated sulphur vulcanization of natural rubber using 1-phenyl-2,4-dithiobiuret/tertiary butyl benzothiazole sulphenamide[J]. European Polymer Journal, 2003, 39(7):1 451-1 460.
  • 3陈焜盛,罗权焜.配方因素对NBR/CSM并用胶物理性能的影响[J].橡胶工业,2007,54(5):283-286. 被引量:3
  • 4Hamza S S. Effect of aging and carbon black on the mechanical properties of EPDM rubber[J]. Polymer Testing, 1998, 17(2) : 131-137.
  • 5Badawy M M. Effect of HAF-carbon black on the elastic behavior of butyl rubber vulcanizates[J ]. Polymer Testing, 2000,19(3) : 341-348.

二级参考文献1

共引文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部