期刊文献+

Effect of Heat Treatment Method on Microstructure of Tailings Glass Ceramics

Effect of Heat Treatment Method on Microstructure of Tailings Glass Ceramics
下载PDF
导出
摘要 A Cao-Mgo-Al2O3-SiO2 quaternary system was established with the main crystal phase design based on Diopside, and the effect of once-through sintering heat treatment on microstructure of iron railings glass ceramics was studied by using DTA, SEM along with measurement of microhardness and volume density. The experimental results show that, when the total amount of FeO and Fe2O3 exceeds 10wt%, a large number of fine nuclei are produced in the annealing process, and the phenomenon of nucleus resorption happens during the process of nucleation heat treatment, which is unfavorable for preparing iron tailings glass ceramics through once-through sintering method. When the annealing temperature from 1250 ℃ to 830 ℃, setting crystallization time for 4h, without heat treatment, crystals are well grown with arrangement and interlocking in glass phase. At 830 ℃ the crystals are well developed, well distributed and of good size; with crystallization time of 4 h the crystals with radial shape have high content and regular arrangement. A Cao-Mgo-Al2O3-SiO2 quaternary system was established with the main crystal phase design based on Diopside, and the effect of once-through sintering heat treatment on microstructure of iron railings glass ceramics was studied by using DTA, SEM along with measurement of microhardness and volume density. The experimental results show that, when the total amount of FeO and Fe2O3 exceeds 10wt%, a large number of fine nuclei are produced in the annealing process, and the phenomenon of nucleus resorption happens during the process of nucleation heat treatment, which is unfavorable for preparing iron tailings glass ceramics through once-through sintering method. When the annealing temperature from 1250 ℃ to 830 ℃, setting crystallization time for 4h, without heat treatment, crystals are well grown with arrangement and interlocking in glass phase. At 830 ℃ the crystals are well developed, well distributed and of good size; with crystallization time of 4 h the crystals with radial shape have high content and regular arrangement.
作者 刘军
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2008年第6期883-888,共6页 武汉理工大学学报(材料科学英文版)
基金 Funded by State Administration of Foreign Experts Affairs and the Younger Natural Science Foundation of Liaoning(wzj-2002, 2005229001)
关键词 one-time sintering heat treatment glass ceramics MICROSTRUCTURE one-time sintering heat treatment glass ceramics microstructure
  • 相关文献

参考文献8

  • 1Cheng Jinshu,,Li Hong,et al.Glass Ceramics[]..2006
  • 2P W Macmillan,Translated by Wang Qianren.Glass Ceram- ics[]..1998
  • 3Cheng T W,Cheng Y S.On formation of Cao-Al2O3-SiO2 Glass-ceramics by Vitrification of in Cinerator Fly Ash[].Chemosphere.2003
  • 4Wang Wenju.Effect of Cooling Process on Strength and Thermal Expansion Property of Cao-Al2O3-SiO2 Glass-ceramics[].Journal of Tsinghua University Science and Technology.2006
  • 5Yu Jianxin,Song kaixin,Liu Xuli.Investigation of Niobium Tantalum Tailings Heat Treatment by Orthogonal Experiment Method[].Bulletin of the Chinese SERAmIc Society.2003
  • 6Xing Jun,Song shouzhi,Liu weiping,et al.Study on Con- trolled Crystallization of Mgo-Al2O3-SiO2 Glass Ceramics[].Journal Of Northeatern University (Natural Science).2000
  • 7Shi Peiyang,Wang yuanyuan,Zhang dayong,et al.Effect of Crystallization Process on Glass Ceramics Microstructure[].Journal of Northeatern University (Natural Science).2007
  • 8Tian Yingliang.Development and preparation of Cao-Mgo-Al2O3-SiO2 Glass Ceramics by Using Iron Tail- ings[].Journal of Beijing University of Technology.2002

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部