期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

三维曲面柔性卷板成形技术及其数值模拟 被引量：5

Three-dimensional surface flexible roll bending technology and its numerical simulation
原文传递
导出
摘要 介绍三维曲面柔性卷板成形技术,并与传统卷板成形和多点成形进行了对比.对柔性卷板成形装置进行研究并开发出相应的实验装置.建立柔性卷板成形的有限元模型,并对其成形过程进行数值模拟,得到了较好的模拟结果.模拟了两种不同材料板材的成形效果,分析了其产生不同成形效果的原因. Three-dimensional surface flexible roll bending was introduced and compared with traditional roll bending and multipoint forming. The flexible roll bending equipment was researched and the corresponding experimental equipment was developed. A finite element model of flexible roll bending was established to simulate the forming process and satisfactory simulated results were gained. The flexible roll bending of sheet metals made of two kinds of materials was simulated and their different forming effects were analyzed.
作者 龚学鹏 李明哲 胡志清
机构地区 吉林大学无模成形技术开发中心
出处 《北京科技大学学报》 EI CAS CSCD 北大核心 2008年第11期1296-1300,共5页 Journal of University of Science and Technology Beijing
基金 国家自然科学基金资助项目(No.50575090) 吉林大学"985工程"资助项目
关键词 成形装置 三维曲面 卷板成形 柔性辊 数值模拟 局部成形 forming equipment three-dimensional surface roll bending flexible roller numerical simulation local forming
分类号 TG306 [金属学及工艺—金属压力加工]
  • 相关文献

参考文献11

  • 1Reutzel E W, Zhang L, Michaleris P. A differential geometry approach to analysis of thermal forming. Int J Mech Sci, 2006, 48: 1046
  • 2Hemrnati S J, Shin J G. Estimation of flame parameters for flame bending process. Int J Mach Tools Manuf, 2007, 47:799
  • 3Wang T, Platts M J. A computer-aided blank design method for the peen forming process. J Mate Process Technol, 2002, 122: 374
  • 4Wang T, Platts M J, Levers A. A process model for shot peen forming. J Mater Process Technol, 2006, 172:159
  • 5Ambrogio G, De Napoli L D, Filice L, et al. Application of incremental forming process for high customized medical product manufacturing. J Mater Process Technol, 2005, 162/163:156
  • 6Mao F, Mo J H, Huang S H. Study on instability of the point bolster sheet metal dieless forming. J Mater Process Technol, 2006, 176: 13
  • 7Shen H Shi Y J, Yao Z Q, et al. An analytical model for estimating deformation in laser forming. Comput Mater Sci, 2006, 37: 593
  • 8Costa S E, Shiomi M, Kozo O, et al. Rapid manufacturing of metal components by laser forming, lnt J Mach Tools Manuf , 2006, 46:1459
  • 9Shi Y J, Yao Z Q, Shen H, et al. Research on the mechanisms of laser forming for the metal plate. Int J Mach Tools Manuf, 2006, 46: 1689
  • 10李明哲,中村敬一.基本的な成形原理の检讨(第1报:板材多点成形法の研究)∥平成4年度日本塑性加工春季講演会论文集.横浜,1992:519)

二级参考文献13

  • 1Ambrogio G,De Napoli L,Filice L,et al.Application of incremental forming process for high customized medical product manufacturing[J].Journal of Materials Processing Technology,2005 (162/163):156-162.
  • 2Mao F,Mo J H,Huang S H.Study on instability of the point bolster sheet metal dieless forming[J].Journal of Materials Processing Technology,2006,176:13-18.
  • 3Li Ming-zhe,Liu Yu-hong,Su Shi-zhong,et al.Multi-point forming:a flexible manufacturing method for a 3D surface sheet[J].Journal of Materials Processing Technology,1999,87:277-280.
  • 4Li M Z,Cai Z Y,Sui Z,et al.Multi-point forming technology for sheet metal[J].Journal of Materials Processing Technology,2002,129(1-3):333-338.
  • 5Li Ming-zhe,Cai Zhong-yi,Liu Chun-guo,et al.Recent developments in multi-point forming technology[C] // Proceedings of the 8th International Conference on Technology of Plasticity.Verona,Italy,2005:707-708.
  • 6山下勇,速藤顺一,加藤和典.可撓口一ルにょる複曲面成形加工の研究(第1報可撓べンディンゲロ一ル機の試作)[C]//日本第37回塑性加工連合講演会論文集,1986:345-348.
  • 7Shen Hong,Shi Yong-jun,Yao Zhen-qiang,et al.An analytical model for estimating deformation in laser forming[J].Computational Materials Science,2006,37:593-598.
  • 8Santos Edson Costa,Shiomi Masanari,Osakada Kozo,et al.Rapid manufacturing of metal components by laser forming[J].International Journal of Machine Tools & Manufacture,2006,46:1459-1468.
  • 9Shi Yong-jun,Yao Zhen-qiang,Shen Hong,et al.Research on the mechanisms of laser forming for the metal plate[J].International Journal of Machine Tools & Manufacture,2006,46:1689-1697.
  • 10Reutzel E W,Zhang L,Michaleris P.A differential geometry approach to analysis of thermal forming[J].International Journal of Mechanical Sciences,2006,48:1046-1062.

共引文献15

同被引文献44

  • 1郑东强,阎祥安,王国栋,肖聚亮.三辊数控卷板成形过程有限元模拟系统研究[J].组合机床与自动化加工技术,2005(8):23-25. 被引量：2
  • 2李明哲,胡志清,蔡中义,龚学鹏.自由曲面工件的连续高效塑性成形方法[J].吉林大学学报（工学版）,2007,37(3):489-494. 被引量：16
  • 3龚学鹏.三维曲面板类件的多点滚压成形研究[D].长春:吉林大学,2010.
  • 4Yamashita I, Yamakawa T. Apparatus for forming plate with a double-curved surface, United States [ P] 4770017,1988-11-13.
  • 5Yoon S J, Yang D Y. Development of a highly flexible incremental roll forming process for the manufacture of a doubly curved sheet metal [J]. CIRP Annals-Manu- facturing Technology, 2003,52 (1) : 201 204.
  • 6Yoon S J, Yang D Y. An incremental roll forming process for manufacturing doubly curved sheets from general quadrilateral sheet blanks with enhanced process features [J]. CIRP Annals-Manufacturing Technology,2005.54(1) .. 221-224.
  • 7D S Shim, D Y Yang, M S Ham et al. Experimental study on manufacturing doubly curved plates using in- cremental rolling process [C]. The 9:h International Conference on Technology of Plasticity, Gyeongju, Ko- rea,2008 : 2378-2383.
  • 8K H Kim, H J Roh, M S Han, et al. Finite element a nalysis o:c the incremental dual curvature bending of a plate in a line array roll set[C]. The 9tu International Conference on Technology of Plasticity. Gyeongju,Ko- rea, 2008.. 1065-1069.
  • 9D S Shim, D Y Yang, K H Kim, et al. Numerical and experimental investigation into cold incremental rolling of doubly curved plates for process design of a new LARS (line array roll set) rolling process[J]. CIRP Annals-Manufacturing Technology, 2009. 58 (1) .- 239- 242.
  • 10D S Shim,D Y Yang,K H Kim,et al. Investigation into forming sequences for the incremental forming of dou- bly curved plates using the line array roll set (LARS) process [J]International Journal of Machine Tools g>Manufacture, 2010. 50.. 214-218.

引证文献5

二级引证文献4

北京科技大学学报
2008年 第11期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部