期刊文献+

Na和电解质对阴极炭块的渗透 被引量:2

PENETRATION OF Na AND ELECTROLYTE INTO CATHODE BLOCK
下载PDF
导出
摘要 采用电解与非电解,加铝液与不加铝液的方法研究了钠和电解质的渗透机理。实验发现:在非电解情况下,不加入铝液,用酚酞测试法没有检测到渗透现象,加入铝液之后,铝和电解质溶解在一起,发生了化学反应,生成钠蒸气和氟化物,渗透到阴极炭块中。在电解情况下,渗透是由化学反应和电化学反应共同引起的,电化学反应引起的渗透深度要强于化学反应。无论电解与非电解,有铝液存在时的渗透深度都是随着电解质分子比的增加而加深。 The penetration mechanism of Na and electrolyte into cathode was studied by electrolysis and nonelectrolysis,adding aluminium or without aluminium. It was discovered that there was not penetration by phenolphthalein reagent in condition of nonelectrolysis and without aluminium. But Na steam and fluoride penetrated into cathode because chemical reaction of aluminium and electrolyte was generated after adding liquid aluminium. During electrolytic process,Na and electrolyte penetrated by both chemical and electrochemical reaction and the penetration mean while electrochemical reaction was stronger than chemical reaction. With the increasing of cryolite ratio,the penetration depth increased.
出处 《炭素》 2008年第4期3-7,共5页 Carbon
关键词 铝电解质 NA 阴极炭块 渗透 aluminium electrolyte Na cathode block penetration
  • 相关文献

参考文献12

  • 1王进良,欧阳全胜,张松江.320kA预焙铝电解槽阴极内衬早期破损原因分析及预防措施[J].湖南有色金属,2005,21(4):10-13. 被引量:1
  • 2何允平,段继文.铝电解槽寿命的研究[M].北京:冶金工业出版社,1988,137-153.
  • 3尹书奎,邵勇,曹继明,潘玉星.大型预焙铝电解槽阴极内衬破损特征及检测[J].轻金属,2005(12):29-32. 被引量:4
  • 4Khramenko S. A,Polyakov P. V,Rozin A. V,et al. effect of porosity structure on penetration and performance of lining materials[A]. Light Metals [C ]. Warrendale.. Minerals, Metals Materials Society, 2005,795- 799.
  • 5Dell M. B. Extractive metallurgy of aluminium [M]. New York : Interscience Publishers, 1963, 403-405.
  • 6Tabereaux A,Brown J,Eldridge I,et al. Operational performance of 70kA prebake cells retrofitted with TiB2-G cathode elements[A]. Light Metals [C]. Warrendale : Minerals, Metals Materials Society, 1998,257- 264.
  • 7冯乃祥.冰晶石熔体和金属Na在铝电解阴极碳块中的共同渗透[J].金属学报,1999,35(6):611-617. 被引量:25
  • 8Brisson P. Y,Soucy G,Fafard M ,et al. Revisiting sodium and bath penetration in the carbon lining of aluminium electrolysis cell[A]. Light Metals [ C ]. Warrendale. Minerals, Metals Materials Society, 2005,727- 732.
  • 9Zotochevsky A, Hop J. G, Servant G, et al. Creep and sodium expansion in a semigraphitie cathode carbon [A]. Light Metals [C]. Warrendale .Minerals ,Metals & Materials Society, 2003,595- 602.
  • 10Sun Y,Wang Q,Rye K. A, et al. Modelling of thermal and sodium expansion in prebaked aluminium reduction cells [A]. Light Metals [C]. Warrendale : Minerals, Metals& Materials Society, 2003,603- 610.

二级参考文献10

  • 1冷正旭,代军,冯乃祥.铝电解槽破损机理及槽寿命若干问题的探讨[J].矿冶,2002,11(1):62-66. 被引量:15
  • 2Sorlie M,Cathode in Aluminium Electrolysis,1994年,115页
  • 3Brilloit P,Metall Trans B,1993年,24卷,75页
  • 4Lossius L P,Internal NTH,1992年,56页
  • 5Feng Naixiang,轻金属,1990年,505页
  • 6Feng N X,Acta Chem Scand A,1987年,40卷,622页
  • 7邱竹贤.电解质中析出钠[M].北京:冶金工业出版社,2005..
  • 8J.M.Peyneau.高度可靠的槽内衬设计[J].Light Metals,1989,:175-181.
  • 9M.Othman等 郭水清译.钠对铝电解槽的影响[J].青海铝业科技,1998,(3):22-25.
  • 10邱竹贤.铝电解原理与应用[M].中国矿业大学出版社,1995.289-290.

共引文献27

同被引文献2

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部