期刊文献+

固化剂对氨基模塑料成型影响的初步探索

Primary research on influence of firming agent on formation of amino moulding plastic
下载PDF
导出
摘要 氨基模塑料成型性能和成色主要取决于固化剂选用。通过氨基模塑料的流动性和固化成型时间两方面来筛选固化剂。选择了7种固化剂进行平行实验。实验结果显示,选用单组分固化剂效果并不理想;又进行了同化剂的复配实验,采用氯化铵和乙二酸复配的固化剂,氨基模塑料流动性能较好,固化时间比较适宜。 The formation performance and the craft quality of amino moulding plastic are greatly depended on the firming agent. The screen of the firming agent is carried out through the flow properties and solidification formation time of the amino moulding plastic. Choosing 7 kinds of firming agents to carry out the parallel experiment, the results show that the effect of single component firming agent is not ideal. But when mixing the firming agents to experiment, the mixed firming agent from ammonium chloride and oxalic acid shows good flow properties and suitable solidification time.
出处 《化学工业与工程技术》 CAS 2008年第6期22-24,共3页 Journal of Chemical Industry & Engineering
关键词 氨基模翅料 固化剂 固化成型时间 流动性 Amino moulding plastic Firming agent Solidification formation time Flow properties
  • 相关文献

参考文献4

二级参考文献17

共引文献84

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部