摘要
Aimed at making high-performance coatings,the UV-crosslinking behavior of bisphenol A-type poly(ether ether ketone) were studied. A homogeneous aqueous dispersion of this soluble poly(ether ether ketone) was successfully obtained through polymer emulsion formation and then the solvent evaporation. The uniform particles(~150 nm) could be formed when mass fraction of the polymer in chloroform was ranged from 3% to 25%. The coating could be prepared via spray-coating method from above concentrated aqueous dispersion and some processing aids. We found the UV crosslinked layers had better hardness,adhesions and solvent-resistance than the ones without UV irradiation.
Aimed at making high-performance coatings, the UV-crosslinking behavior of bisphenol A-type poly( ether ether ketone) were studied. A homogeneous aqueous dispersion of this soluble poly( ether ether ketone) was successfully obtained through polymer emulsion formation and then the solvent evaporation. The uniform particles( -150 nm) could be formed when mass fraction of the polymer in chloroform was ranged from 3% to 25%. The coating could be prepared via spray-coating method from above concentrated aqueous dispersion and some processing aids. We found the UV crosslinked layers had better hardness, adhesions and solvent-resistance than the ones without UV irradiation.
出处
《高等学校化学学报》
SCIE
EI
CAS
CSCD
北大核心
2009年第1期224-226,共3页
Chemical Journal of Chinese Universities
基金
国家自然科学基金(批准号:50773025)资助
关键词
高性能高分子
聚芳醚酮
水基分散液
涂层
High performance polymer
Polyaryletherketone
Aqueous dispersion
Coating