摘要
以齿轮接触为对象,推导了齿轮接触赫兹应力公式。利用ANSYS有限元分析软件对齿轮接触进行了仿真分析,并对有限元分析仿真值与推导公式的计算值进行了比较。结果表明,理论计算值和仿真值非常接近,表明采用AN-SYS有限元分析软件分析齿轮表面接触问题是可行的。
Hertz stress formula of gear contact was deduced. Finite element analysis software ANSYS was used to make contact analysis of gear, the simulation result of the finite element analysis was compared with the calculating result. It is found that the simulation result and calculating result are very close. It is feasible to analyze gear surface contact by using ANSYS finite element analysis software.
出处
《润滑与密封》
CAS
CSCD
北大核心
2009年第1期49-51,共3页
Lubrication Engineering
基金
广东省汽车工程重点实验室项目(3007A03013)
关键词
齿轮
接触分析
有限元法
赫兹公式
gear
contact analysis
finite element method
Hertz formula
