期刊文献+

新型Hy-Vo齿形链的噪声试验研究 被引量:4

Research on Noise Test of New Hy-Vo Silent Chain
下载PDF
导出
摘要 通过噪声试验,验证了新型Hy-Vo齿形链高速下的低噪声特性,首次研究了链轮量棒测量距的变化、中心距(垂度)的变化、节距的变化对新型Hy-Vo齿形链噪声特性的影响规律,提出了降低新型Hy-Vo齿形链传动噪声的有效方法,从而为新型Hy-Vo齿形链的国产化奠定了基础。试验结果表明,新型Hy-Vo齿形链传动的噪声明显低于套筒滚子链传动的噪声,同时也进一步验证了新型Hy-Vo齿形链及链轮啮合分析及其设计方法的科学性和可行性。 Through the noise experiment,it is proved the low-noise characteristics of new Hy- Vo silent chain under high speed. It first made the research on the influence rules on the low-noise characteristics of new Hy-Vo silent chain according to the change of sprockets meter distance, center distance and pitch. It also raised the effective way of lowering the noise of new Hy-Vo silent chain and laid the foundation on the nationalization of new Hy-Vo silent chain. It is showed by the experimental results that the noise of new Hy-Vo silent chain is obviously lower than that of sleeve roller chain. At the same time, it proves the sensibility and feasibility of the analysis and design method of meshing theory of new Hy-Vo silent chain and sprocket.
出处 《中国机械工程》 EI CAS CSCD 北大核心 2009年第2期131-133,共3页 China Mechanical Engineering
基金 国家自然科学基金资助项目(50575089)
关键词 新型Hy—Vo齿形链 噪声 频谱分析 节距 中心距 new Hy- Vo silent chain noise spectrum analysis pitch center distance
  • 相关文献

参考文献3

  • 1孟繁忠,李启海,冯增铭.新型Hy-Vo齿形链与链轮的啮合分析及其设计方法[J].机械工程学报,2007,43(1):116-119. 被引量:20
  • 2国家旋转电机标准化委员会.GB10069.2-1998旋转电机噪声测定方法及限值噪声简易测定方法[S].北京:中国标准出版社,1998.
  • 3机械工业局.JB2281-78金属切削机床噪声测量[S].北京:技术标准出版社,1997.

二级参考文献2

共引文献19

同被引文献38

引证文献4

二级引证文献21

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部