期刊文献+

铝磷酸盐无机树脂铸造粘结剂理化特性的影响因素研究 被引量:1

Investigation on Affecting Factors of Physical-chemical Characteristics of Inorganic Aluminum Phosphate Foundry Binder
下载PDF
导出
摘要 对添加剂与铝磷酸盐无机树脂中和度、密度、粘度、稳定性等理化特性之间的关系进行了研究。结果表明,镁离子添加剂和硼离子添加剂均会增大磷酸盐粘结剂的密度和粘度,前者更显著。中和度和密度两个因素均对粘结剂的稳定性产生影响。硼离子添加剂使粘结剂中和度降低,稳定性显著提高,但过量则会使稳定性大大下降,降低密度也不能得到大的改善;镁离子添加剂使粘结剂中和度增大,稳定性下降。二者共同作用能够使高中合度下的粘结剂在较低密度时具有良好的稳定性。 The relationship between additives and physical-chemical characteristics of aluminum phosphate foundry binder is studied. The results show that both Mg-and B-Ion additives can increase the density and viscosity of aluminum phosphate binder, but the former is more significant. Neutralization degree and density affect binder's stability. B-Ion additive decreases neutralization degree and increases stability, but excessive addition decreases stability and lowered density can not improve the stability; Mg-lon additive increases neutralization degree and decrease stability. The binder with a high neutralization degree and low density can obtain better stability by the compound addition.
出处 《铸造技术》 CAS 北大核心 2009年第1期15-18,共4页 Foundry Technology
基金 湖北省教育厅资助项目(B200514004) 湖北省科技厅资助项目(2005ABA056)
关键词 铝磷酸盐 中和度 粘度 密度 稳定性 Aluminum phosphate Neutralization degree Viscosity Density Stability
  • 相关文献

参考文献10

  • 1Gardikes John J, Toeniskoetter Richard H. Aluminum phosphate binder composition cured with ammonia and amines[P]. US Pat,4127157,1978-11-28.
  • 2Seeney Charles E, Kraemer John F, Ingebrigtsen Janis. Binder for preparing improved cores and molds[P]. US Pat,4423764,1984-01-03.
  • 3Johnson Calvin K, Tse Kwok-tuen, Zaretskiy Leonid S, Algar Brian E. Binders for cores and molds[P]. US Pat, 6299677,2001-10-09.
  • 4Bambauer Ruth A, Langer Heimo J, Akey Steven C. Inorganic foundry binder systems and their uses[P]. US Pat, 5582232,1996-10-10.
  • 5Efimov K M, Dzhurinskij B F, Kozlov B I. Method of Preparing Phosphate Binder[P]. RU Pat,2148042,2000- 04-27.
  • 6Makhlaj V N. Method Of Preparing Chromo-Alumino-Phosphate Binder[P]. RU Pat,2187478,2002-08-20.
  • 7肖泽辉.以磷酸铝为粘结剂的铸钢用陶瓷型过滤片的试验研究[J].铸造技术,1999(2):22-24. 被引量:2
  • 8李焕臣,杨晓平,李毅.硅酸二钙磷酸盐自硬砂的研究[J].热加工工艺,2003,32(1):42-43. 被引量:8
  • 9刘胜新,史玉芳,刘芬,巨联国,陈翠凤.磷酸盐自硬砂的研究[J].铸造,2000,49(2):112-114. 被引量:14
  • 10中国机械工程学会铸造分会编,铸造手册第二版第4卷(造型材料)[M].北京:机械工业出版社,2003.

二级参考文献14

  • 1韦中新,谢庆文,唐志平.改性聚乙烯醇自硬砂的研究[J].热加工工艺,1996(1):40-41. 被引量:4
  • 2洛阳耐火材料研究所.硅酸盐耐火材料混凝土[M].洛阳:洛阳耐火材料研究所,1972..
  • 3刘根荣.Al2O3-P2O3-H2O和MgO-P2O5-H2O系统的相平衡及其在磷酸盐胶凝材料中的应用[J].硅酸盐学报,1980,(8):38-53.
  • 4肖泽辉.江苏理工大学硕士论文[M].,1971,7..
  • 5洛阳耐火材料研究所.磷酸盐耐火混凝土[M].,1972..
  • 6洛阳耐火材料研究所,磷酸盐耐火混凝土,1972年
  • 7肖泽辉,硕士学位论文,1971年
  • 8胡彭生,型砂,1994年
  • 9巨连国,铸造技术,1990年,4期,3页
  • 10朱纯熙,铸型材料化学,1990年

共引文献18

同被引文献6

引证文献1

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部