摘要
将Ni负载在H-ZSM-5和H-MOR分子筛催化剂上,以异丙苯为模型化合物对分子筛催化剂加氢脱烷基性能进行评价。考察了分子筛复配比例、金属含量和酸浓度对催化剂活性的影响。结果表明,酸处理后的分子筛催化剂,异丙苯转化率和苯、甲苯、二甲苯(BTX)的收率有明显提高。当反应温度为340℃、压力0.8 MP和空速1 h^(-1)时,其转化率为81.5%,BTX收率为72.8%,选择性可达89.2%。
Nickel was loaded over H-ZSM-5 and H-MOR and performance of the resultant catalysts for hydrodealkylation was investigated using isopropylbenzene (IPB) as the model compound. Influence of zeolite proportion, metal content and acid content on the catalytic activity was investigated. The results showed that IPB conversion, benzene, toluene mid xylene (BTX) yield were remarkably enhanced over Ni/( H-ZSM-5 + H-MOR) catalyst treated by acid. IPB conversion of 81.5%, BTX yield of 72.8% and selectivity to BTX of 89.2% were attained under the following condition : 340 ℃, 0. 8 MPa, LHSV 1 h ^- 1.
出处
《工业催化》
CAS
2009年第1期26-29,共4页
Industrial Catalysis
关键词
催化化学
复合分子筛催化剂
金属负载
C9芳烃
酸处理
加氢脱烷基
catalytic chemistry
composite zeolite catalyst
metal loading
C9 aromatics
acid treatment
isopropylbenzene hydrodealkylation