摘要
通过添加导热系数较高的纳米AlN、C纤维来制备超高分子量聚乙烯复合材料,采用Hot Disk导热系数仪测试了其导热系数,同时分析了不同添加物及其含量对导热系数的影响。结果表明,制备的超高分子量聚乙烯复合材料的导热性能有明显提高。在本实验条件下,当纤维的添加量达到20%时,复合材料的热导率为0.8969 W.m-1.K-1,比纯超高分子量聚乙烯提高了150%。
Several accretions(nano-AlN,C fibre) with high thermal conductivity were added in UHMWPE, and the thermal conductivities of different nano-composites were measured by Hot Disk. Furthermore, the influences of different accretions and different contents on the thermal conductivity were researched. The results showed that, the thermal con- ductivities of UHMWPE nano-composites were advanced highly, and it could be 0. 8969 W·m-1·K-1 when 20%0 carbon was added in the experiment.
出处
《化工新型材料》
CAS
CSCD
北大核心
2009年第1期72-74,共3页
New Chemical Materials
基金
国家自然科学基金(20346001)
广东省关键领域重点突破项目(B10-B2060090)
高等学校博士学科点专项科研基金(20050561017)
教育部新世纪优秀人才支持计划(NCET-04-0826)
关键词
超高分子量聚乙烯
复合材料
导热性能
ultra-high molecular weight polyethylene, composite, thermal conductivity