摘要
为分析掺氢燃烧对天然气发动机的影响,给出3种不同的计算燃烧质量比曲线的R-W方法,由Wiebe函数模拟燃烧过程。采用这3种方法根据模拟压力计算出的燃烧质量比曲线和输入的Wiebe曲线相比,选取精度最高的方法对不同掺氢比的天然气发动机燃烧放热过程进行分析。研究结果表明:RW-3方法精度最高,随着掺氢比的增加,燃烧速度加快,燃烧过程明显缩短。
In order to analyze the effect of hydrogen addition on the performance of natural gas engine, three different R-W methods for calculating combustion mass fraction were given first. Wiebe function was used to simulate the combustion process. The calculated combustion mass fraction using these three methods which were based on the simulated pressure was compared to that using the Wiebe function input, and the method with the best precision was selected to calculate the combustion mass fraction of natural gas engine with different fraction of hydrogen addition. The results show that RW-3 method has the highest precision for calculating combustion mass fraction, and with the increase of hydrogen fraction, the combustion speed increases and the combustion duration decreases obviously.
出处
《内燃机工程》
EI
CAS
CSCD
北大核心
2009年第1期15-18,共4页
Chinese Internal Combustion Engine Engineering
基金
哈尔滨工业大学优秀青年教师培养计划资助项目(HITQNJS.2008.061)
哈尔滨工业大学(威海)博士科研启动基金项目(HIT(WH)-ZB200809)
关键词
内燃机
天然气发动机
掺氢比
R—W法
燃烧质量比
IC engine
natural gas engine
fraction of hydrogen addition
R-W method
combustion mass fraction
