摘要
利用纳米SiO2对氰酸酯(CE)树脂进行改性,并分别选用小分子偶联剂KH-560和大分子偶联剂SEA-171对纳米SiO2进行表面处理,研究了纳米SiO2含量以及偶联剂结构对纳米SiO2/CE树脂复合材料力学性能的影响。结果表明:随着纳米SiO2含量的增大,复合材料的冲击强度和弯曲强度均呈先增大后减小的趋势,大分子偶联剂处理后的纳米SiO2增强效果比小分子的好;当大分子偶联剂处理后的SiO2质量分数为3%时,复合材料的强度达到最大,其中冲击强度达15.99 kJ.m-2,弯曲强度达147.55 MPa,与纯CE树脂相比,增幅分别为61.9%和44.2%。
Cyanate ester（CE） resin was modified by nanometer SiO2 which surface was treated with the small molecule coupling agent KH-560 and macromolecule coupling agent SEA-171 respectively. The influence of nanometer SiO2 content and coupling agents structure on the mechanical of nanometer SiO2/CE resin composites material was investigated. The results showed that both the impact strength and the flexural strength of the composites first increased then decreased with the increase of SiO2 content. Strengthening effect of, nanometer SiO2 treated by macromolecule coupling agent was better than that treated by small molecule. When the SiO2 treated by macromdecule coupling agent content was 3 %, strength of the composites reached the maximum with the impact strength of 15. 99 kJ .m^-2 and flexural strength of 147.55 MPa, which were 61.9% and 44. 2% higher than that of pure CE respectively
出处
《机械工程材料》
CAS
CSCD
北大核心
2009年第2期78-81,85,共5页
Materials For Mechanical Engineering
基金
陕西省教育厅专项科研计划资助项目(06JK303)
陕西省科技厅专项基金资助项目(2006B25)
关键词
纳米SIO2
氰酸酯
复合材料
偶联剂
力学性能
nano-SiO2
cyanate ester（CE）
composite
coupling agent
mechanical property
