期刊文献+

立体显示中立体深度与视差图获取的关系 被引量:31

Relationship between stereo depth and parallax image captured in stereoscopic display
下载PDF
导出
摘要 自由立体显示器的再现立体深度与视差图的视差大小有关系,而视差的大小与获取视差图时相机摆放方式密切相关。本文采用平行结构放置相机,通过设置相机间距使得拍摄到的视差图在相对平移后某一深度物点具有零视差,而另一深度物点具有所期望的视差。视差大小体现了再现立体深度大小,从而得到再现立体深度与相机间距间的定量关系。通过实验验证了推出关系的正确性。该研究结果可用于指导拍摄立体影像时相机的摆放,便于获得适当的视差图以达到最佳的立体显示效果。 In stereoscopic displays, stereo depth is associated with parallax in parallax image, and parallax is related with the layout of cameras when the parallax images are captured. In the paper, these cameras are laid in parallel configuration. By setting proper distance between cameras and shifting the images reasonably, the objects with a certain depth have zero parallax and the objects with other depth have expected parallax. The parallaxes correspond to different stereo depths, so the quantitative relationship between stereo depth and distance of two cameras for capturing the parallax images is obtained. An experiment is carried out to verify the theory, the results show that proposed quatitative relationship can help to take good parallax images for stereoscopic displays by laying out cameras suitably.
出处 《光学精密工程》 EI CAS CSCD 北大核心 2009年第2期433-438,共6页 Optics and Precision Engineering
基金 国家高技术研究发展专项经费资助项目(No.2007AA01Z301)
关键词 自由立体显示 立体深度 视差图 相机摆放 stereoscopic display stereo depth parallax image layout of camera
  • 相关文献

参考文献5

二级参考文献23

  • 1刘宏建,罗毅,刘允才.可变精度的神经网络摄像机标定法[J].光学精密工程,2004,12(4):443-448. 被引量:13
  • 2陈刚,车仁生,叶东,黄庆成.一种基于立体模板的双目视觉传感器现场标定方法[J].光学精密工程,2004,12(6):626-631. 被引量:28
  • 3[2]ZOU D H. Research on three-dimensional vision inspection system and ADC application[R]. In candidacy for doctor degree,Tianjin: Tianjin University,1992.
  • 4[3]DDWAR R. Self-generated targets for spatial calibration of structured light optical sectioning sensors with respect to an external coordinate system[C]. Robots and Vision'88 Conf. Proceedings, Detroit, 1988: 5-13
  • 5[4]LIU F M, DUAN F J, YE SH H. The new method of calibrating the parameter of the structured light trip system by using the dentiform target[J]. Measurement Technique, 1999,(1):3-6
  • 6[5]HUYNH D Q. Calibration a structured light stripe system: a novel approach[J]. International Journal of Computer Vision, 1993,33(1):73-86.
  • 7[8]BERTAGNOLLI F,DILLMANN R. Flexible automated process assurance through non-contact 3D measuring technology[C]. IEEE conference on multisensor fusion andintegration for intelligent systems, 2003: 27-31.
  • 8[9]ZELLER C, FAUGERAS O D. Camera self-calibration from viedo sequences[M]. The Kruppa Equation. INRIA: Rapport de Recherche,1996:2793.
  • 9ZHANG Z Y.A flexible new technique for camera calibration[R].Technical Report,2002.
  • 10JANNE H.Geometric camera calibration using circular control points[J].IEEE Transactions on Pattern Analysis and Machine Intelligence.2000,22(10):1066-1077.

共引文献61

同被引文献307

引证文献31

二级引证文献82

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部