期刊文献+

双马来酰亚胺/聚醚酰亚胺共混体系的增韧改性研究

Compatibilization and toughening of bismaleimide/polyetherimide blend system
下载PDF
导出
摘要 研究了有机硅烷偶联剂对双马/聚醚酰亚胺共混体系的增容增韧作用。结果表明,加入有机硅烷偶联剂KH-550、KH-560、偶联剂B后,共混物断裂韧性(GIC)均有大幅度提高,其中偶联剂B增韧效果最佳;当B的添加量为2.5份时,体系的断裂韧性最大,达到1053J/m^2,为改性前的3.9倍,体系的微观形貌(SEM)由改性前的两相结构转变为双连续相结构。 The compatibilization and toughening effect of organic silane coupling agents on bismaleimide/polyetherimide blend system was studied in this paper. The results showed that the blend fracture toughness ( GIC ) had a substantial increase when the organic silane coupling agents KH-550,KH-560 and B were added into the blends respectively, and the B showed the best toughening effect; when B content was 2.5 phr in blends, the fracture toughness was the highest, reaching to 1053 J/m^2 and 3.9 times of that for before modification;the morphology (SEM) of blends became double continuous phase structure from two-phase structure for before modification.
出处 《粘接》 CAS 2009年第1期57-59,共3页 Adhesion
关键词 有机硅烷偶联剂 增容增韧 断裂韧性 双连续相 organic silane coupling agents compatibilization and toughening fracture toughness double continuous phase structure
  • 相关文献

参考文献5

  • 1Wilkinson S P, Ward T C, Mcgrath J E. Effect of thermoplasticmodifier variables on toughening a bismaleimide matrix resin fo high-performance composite materials [J]. Polymer, 1993, 34 (4) : 870-884.
  • 2Bao Yan-Zhang,Li Ping,Xiang Bao-Chen. Studies of modified bismaleimide resins Part I The influence of resin composition on thermal and impact properties[J].Journal of Material Science,1998,33 (23) : 5683-5687.
  • 3刘刚,刘奇涛,凌辉,宁荣昌,叶保民.聚醚酰亚胺对共聚双马树脂的增韧作用[J].中国胶粘剂,2008,17(4):6-9. 被引量:6
  • 4马蕊然.断裂表面能的测试[M].西安:西北工业大学出版社.1991.
  • 5Wiederhorm S M,Shorb A M,Moses R L.Critical analysis of the theory of the double cantilever method of measuring fracture-surface energies [J].Journal of Applied Physics,1968,39(3):1569-1572.

二级参考文献11

  • 1宁荣昌,宋涛.热塑/热固共混树脂对复合材料抗冲击损伤性能的影响[J].玻璃钢/复合材料,1996(1):25-29. 被引量:2
  • 2ABBATE M,MARTUSCELLI E,MUSTO P,et al. Thermosetting bismaleimide/reactive rubber blends:Curing kinetics and mechanical behavior[J]. Journal of Applied Polymer Science, 1998,65 (5) :979-990.
  • 3WILKINSON S P,WARD T C,MCGRATH J E. Effect of thermoplastic modifier variables on toughening a bismaleimide matrix resin for high-performance composite materials[J]. Polymer, 1993,34 (4):870-884.
  • 4TAKAO IIJIMA,TSUTOMU NISHINA,WAKICHI FUKUDA ,et al. Modification of bismaleimide resin by poly (phthaloyl diphenyl ether)and the related copolymers[J]. Journal of Applied Polymer Science, 1998,67 (5) : 769-780.
  • 5TAKAO IIJIMA, NOBUAKI HAYASHI,TOSHIYUKI OYA- MA,et al. Modification of bismaleimide resin by soluble poly ( ester imide ) containing trimellitimide moieties [J], Polymer International ,2004,53(10):1417-1425.
  • 6WEI GUANG-XUE,SUE H J. Fracture mechanisms in preformed polyphenylene oxide particle-modified bismaleimide resins[J]. Journal of Applied Polymer Science, 1999,74(10) :2539-2545.
  • 7JIN JIAN-YONG, CUI JUN ,TANG XIAO-LIN ,et ol. Polyetherimide-modified bismaleimide resins II:Effeet of polyetherimide content[J]. Journal of Applied Polymer Science ,2001,81 (2) :350-358.
  • 8LUO YAN, YU XIN -HAI, CAI XIAN -QING, et al. Polyesterimide-modified bismaleimide resins I:Effect of polyesterimide content [J]. Journal of Macromolecular Science (Part A), 2002,39 (8) : 825-836.
  • 9马蕊然.断裂表面能的测试[R].西安:西北工业大学出版社,1991.
  • 10WIEDERHORM S M,SHORB A M,MOSES R L. Critical analysis of the theory of the double cantilever method of measuring fracture-surface energies[J]. Journal of Applied Physics, 1968,39(3) : 1569-1572.

共引文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部