摘要
结合鱼洞长江大桥南引桥采用的贝雷梁柱式支架进行连续箱梁现浇的施工工艺,从贝雷梁柱式支架的受力分析入手,通过桥梁博士3.0计算得到不同工况下现浇箱梁贝雷梁柱支架的受力,然后采用ANSYS 9.0有限元分析软件建立的贝雷梁柱支架模型,对贝雷梁柱支架施工过程的空间稳定性进行了计算,得到了相关稳定系数及对应的失稳模态,最后给出了防止此类贝雷梁柱支架失稳的相关建议。
Taking the southern approach bridge of Yudong Yangtze River Bridge as the research object, which applies the cast-in-place construction technology to continuous box girder on Bailey beams stent, the stent-reaction forces under different conditions of cast-in-place box girder are obtained through Dr 3.0 bridge finite element analysis software. Then Bailey truss structure model established by ANSYS 9.0 finite element analysis software is applied to check the spatial stability in the construction of Bailey truss structure. The relevant stability coefficients and the corresponding instability modes are obtained. Eventually, relevant recommendations to prevent such instability of Bailey stent are given.
出处
《重庆交通大学学报(自然科学版)》
CAS
北大核心
2009年第1期11-15,共5页
Journal of Chongqing Jiaotong University(Natural Science)
关键词
贝雷桁架
支架施工
稳定性
混凝土箱梁
Bailey truss structure
stent construction
stability
concrete box girder