期刊文献+

Preparation and microstructure characterization of a nano-sized Ti^(4+)-doped AgSnO_2 electrical contact material 被引量:24

Preparation and microstructure characterization of a nano-sized Ti^(4+)-doped AgSnO_2 electrical contact material
下载PDF
导出
摘要 A Ti^4+-doped nano-structured AgSnO2 material was prepared using sol-gel method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The results show that Ti^4+ cations are successfully doped into the crystal lattice of SnO2, and thus significantly improve the electrical conductivity of the sample. Furthermore, the coating of Ag on Ti^4+-doped SnO2 nano-sized particles enhances the surface wettability and enables the resulting AgSnO2 material to have better mechanical properties. A Ti^4+-doped nano-structured AgSnO2 material was prepared using sol-gel method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The results show that Ti^4+ cations are successfully doped into the crystal lattice of SnO2, and thus significantly improve the electrical conductivity of the sample. Furthermore, the coating of Ag on Ti^4+-doped SnO2 nano-sized particles enhances the surface wettability and enables the resulting AgSnO2 material to have better mechanical properties.
出处 《Rare Metals》 SCIE EI CAS CSCD 2009年第1期19-23,共5页 稀有金属(英文版)
关键词 electrical contact material sol-gel process DOPING chemical coating silver electrical contact material sol-gel process doping chemical coating silver
  • 相关文献

参考文献12

  • 1Yasuyoshi S., Hisaaki T., Toshihiko T., Tatsuhiko N., Kazu- masa T., Takahiko H., Toshiatsu N., and Masaya N., Lead-free piezoelectrics, Nature, 2004, 432: 84.
  • 2Leung C., Eric S., and Dermis F., Weibull analysis of switching contact resistance in laboratory and commercial circuit breakers, [in] Proceedings of the 53th IEEE Holm Conference on Electrical Contacts, Pittsburgh, 2007: 56.
  • 3Choi W.J., Reliability of Pb-free Solders in Electronic Packaging Technology [Dissertation], University of California, Los Angeles, 2002: 16.
  • 4Liu L.B., Cristina A., and Johan L., Thermodynamic assessment of the Sn-Co lead-free solder system, J. Electron Mater., 2004, 33: 935.
  • 5Liu Y., Li Z.Y., and Li J.H., IrO2/SnO2 electrodes: prepared by sol-gel process and their electrocatalytic for pyrocatechol, Acta Mater. (in Chinese), 2004, 52: 721.
  • 6Lopez-Navarrete E., Caballero A., Orera V.M., Lazaro F.J., and Ocana M., Oxidation state and localization of chromium ions in Cr-doped cassiterite and Cr-doped malayaite, Acta Mater., 2003, 51: 2372.
  • 7Garima J. and Kumar R., Electrical and optical properties of tin oxide and antimony doped tin oxide films, Opt. Mater., 2004, 26: 27.
  • 8Miao H.Y., Ding C.S., and Luo H.J., Antimony-doped tin dioxide nanometer powders prepared by the hydrothermal method, Microelectron Eng. (in Chinese), 2003, 66: 142.
  • 9Lee K.M., Lee D.J., and Ahn H., XRD and TEM studies on tin oxide (II) nanoparticles prepared by inert gas condensation, Mater. Lett., 2004, 58:3122.
  • 10Ewa B., Wettability studies of cubic boron nitride by silver-titanium, Ceram. Int., 1995, 21: 303.

同被引文献239

引证文献24

二级引证文献99

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部