期刊文献+

DEM simulation of polydisperse systems of particles in a fluidized bed 被引量:3

DEM simulation of polydisperse systems of particles in a fluidized bed
原文传递
导出
摘要 Numerical simulations based on three-dimensional discrete element model (DEM) are conducted for mono-disperse, binary and ternary systems of particles in a fluidized bed. Fluid drag force acting on each particle depending on its size and relative velocity is assigned. The drag coefficient corresponding to Ergun's correlation is applied to the system of fluidized bed with particle size ratios of 1:1 for the mono-disperse system, 1:1.2, 1:1.4 and 1:2 for the binary system and 1:1.33:2 for the ternary system by keeping total volume and surface area of the particles constant. Results indicated that a reasonable estimation of drag force based on individual particle diameters as compared to that of the mean diameter of the particles is achieved in the fluid cells. The total translational kinetic energy of the particles is found to increase as the particle size ratio increases, suggesting an enhanced momentum transfer in polydisperse particle systems. Systems with wide particle size distribution exhibited higher particle velocities around bubbles, resulting in faster bubble growth and its subsequent rise through the fluidized bed. Numerical simulations based on three-dimensional discrete element model (DEM) are conducted for mono-disperse, binary and ternary systems of particles in a fluidized bed. Fluid drag force acting on each particle depending on its size and relative velocity is assigned. The drag coefficient corresponding to Ergun's correlation is applied to the system of fluidized bed with particle size ratios of 1:1 for the mono-disperse system, 1:1.2, 1:1.4 and 1:2 for the binary system and 1:1.33:2 for the ternary system by keeping total volume and surface area of the particles constant. Results indicated that a reasonable estimation of drag force based on individual particle diameters as compared to that of the mean diameter of the particles is achieved in the fluid cells. The total translational kinetic energy of the particles is found to increase as the particle size ratio increases, suggesting an enhanced momentum transfer in polydisperse particle systems. Systems with wide particle size distribution exhibited higher particle velocities around bubbles, resulting in faster bubble growth and its subsequent rise through the fluidized bed.
出处 《Particuology》 SCIE EI CAS CSCD 2009年第1期9-18,共10页 颗粒学报(英文版)
基金 support from Japanese Society for Promotion of Science (JSPS) for conducting this research work
关键词 Discrete element method Fluid drag force Fluidized bed Particle size distribution Discrete element method Fluid drag force Fluidized bed Particle size distribution
  • 相关文献

参考文献28

  • 1Anderson,T.B.,& Jackson,R.(1967).A fluid mechanical description of fluidized beds:Equations of Motion.Industrial Engineering Chemical Fundamentals,6(4),527-539.
  • 2Cundall,P.A.,& Strack,O.D.L.(1979).A discrete numerical model for granular assemblies.Geotechnique,29,47-65.
  • 3Ergun,S.(1952).Fluid flow through packed columns.Chemical Engineering Progress,48(2),89-94.
  • 4Fan,L.-S.,& Zhu,C.(1998).Principles of gas-solid flows.New York:Cambridge University Press.
  • 5Garcia-Ocha,F.,Romero,A.,Villar,J.C.,& Bello,A.(1989).A study of segregation in a gas-solid fluidized bed:Particles of different density.Powder Technology,58(3),169-174.
  • 6Grace,J.R.,& Sun,G.(1991).Influence of particle size distribution on the performance of fluidized bed reactors.Canadian Journal of Chemical Engineering,69,1126-1134.
  • 7Gupta,C.K.,& Sathiyamurthy,D.(1999).Fluid bed technology in materials processing.Florida:CRC Press.
  • 8Horio,M.,Liu,J.,& Muchi,I.(1982).Particle behavior in the fluidized-bed grid zone,bubbling zone and freeboard.In K.Mooson & K.Daizo (Eds.),Fluidization science and technology (pp.112-123).Beijing:Science Press.
  • 9Kaneko,Y.,Shiojima,T.,& Horio,M.(1999).DEM simulation of fluidized beds for gas-phase olefin polymerization.Chemical Engineering Science,54(24),5809-5821.
  • 10Kunni,D.,& Levenspiel,O.(1991).Fluidization engineering.Boston:Butterworth-Heinemann.

同被引文献4

引证文献3

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部