摘要
研究了等离子体的处理功率、处理时间和气氛以及芳纶帘线浸胶处理与否对芳纶帘线/橡胶复合材料界面的影响。结果表明,经过等离子体处理后,未浸胶芳纶帘线在H抽出时发生界面破坏,而结合浸胶处理,H抽出时破坏由橡胶基体逐步向芳纶帘线发展,橡胶基体能有效地通过界面向芳纶帘线表面传递应力;最佳的等离子体处理条件是在空气气氛中,处理功率为50 W,处理时间为5 min。
The effect of plasma treatment combined dipping in emulsion on interface of aramid cord/rubber composites were investigated. The results showed that the interface of aramid/rubber composites was failed when aramid cord was treated by plasma without dipping emulsion in H pull test. When aramid cord was treated by plasma and combined dipping in emulsion, the failure of interface of composites developed gradually from rubber matrix to reinforcement materials in H pull tests, and it was indicated that rubber matrix could effectively transfer stress to aramid surface. The optimum plasma treatment conditions of aramid cord were 50 W for 5 min in air atmosphere.
出处
《合成橡胶工业》
CAS
CSCD
2009年第2期118-122,共5页
China Synthetic Rubber Industry
基金
国家自然科学基金重点资助项目(59933060)
国家“十一五”科技攻关计划重点资助项目(2002BA314B06)
广东省自然科学基金资助项目(5300977)
