摘要
为了增加装烟密度,降低烟农劳动强度,提高烟叶质量,推广密集式烤房。以标准化气流上升式普通烤房(2.7m×2.7m)为基础进行密集化改造,通过分别配置750、550、370、250、150W循环风机,扩大供热系统,强制通风排湿,建造循环通道,使装烟容量增加一倍,并采用三段式烘烤工艺。以传统的普通烤房、传统的装烟密度和烘烤工艺作为对照,分析烘烤过程中的烤房垂直温差、平面温差、烤后烟叶的内外品质。结果表明:风量5600m3/h、功率250W轴流风机效果理想。
In order to add the loading density,reduce the labor intensity of tobacco grower,popularize the bulkc uring barn and raise the quality of flue-cured tobacco,a lot of planters use the bulk curing bar.Based on then ormativeup-draftordinarycuringbarn(2.7m×2.7m),Some measures were taken such as,Barn intensification of transformation,heating system was enlarge,forced wind vet,circulation channel was constructed;Several types ofa ir circulation fan were Installed,whose power is 750,550,370,250,150 W.the capacity of tobacco loading willi ncrease twice,using three stage curing of flue-cured tobacco,the control was convention curing process.Thev ertical temperature difference and level temperature difference were detected.What's more,the inherent ando uter quality of flue-cured tobacco was analyzed.The results showed that the air volume was 5600 m3/h and the power of axial flow fan was 250W could get good result.
出处
《中国农学通报》
CSCD
北大核心
2009年第4期288-291,共4页
Chinese Agricultural Science Bulletin
基金
国家烟草专卖局资助项目"密集烤房的优化配置与相关技术推广项目"(110200302007)。
关键词
烤烟
烤房
密集烤房
循环风机
品质
flue-cured tobacco,flue-curing barn,bulk curing barn,circulating fan,quality