期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

高效钢板表面感应加热器参数研究 被引量：3

Study on Parameters of the Inductor in High Efficiency Induction Heating for Plate Forming
下载PDF
导出
摘要 为了提高钢板感应加热成型的加工效率,对感应器的形状参数开展了研究,提出了几种新型感应器。同时采用数值实验的方法,对其加工过程进行了数值计算,并对不同感应器的加工效率进行了分析比较。结果表明新型感应器在加工效率方面具有较好的效果。 A study on design of the inductors is carried out in order to improve the efficiency of plate bending by induction heating. Then several kinds of inductors are put forward. Finally the plate bending process is simulated based on numerical experiment. Simulation results show that the inductors proposed in this paper behave well in respect of forming efficiency
作者 胡雪锋 刘玉君 张雪彪 邓燕萍
机构地区 大连理工大学船舶工程学院
出处 《中国造船》 EI CSCD 北大核心 2009年第1期101-108,共8页 Shipbuilding of China
关键词 船舶 舰船工程 钢板成型 感应加热 感应器 数值实验 ship engineering plate forming induction heating inductor numerical experiment
分类号 U671.3 [交通运输工程—船舶及航道工程]
  • 相关文献

参考文献13

  • 1Mc CARTHBY R W, Thermo-Mechanical Forming of Steel Plates Using Laser Line Heat[D]. Cambridge. Massachusetts Institute of Technology, 1985.
  • 2SCULLY K. Laser line heating[J]. Journal of Ship Production, 1987, 3 (4): 237-246.
  • 3CLAUSEN H B. Plate Forming by Line Heating. [D]. Odense: Technical University of Denmark, 2000.
  • 4UEDA Y, MURAKAWA H, MOHAMED A, OKUMOTO Y, et al. Development of computer-aided process planning system for plate bending by line heating (report 1): Relation between final form of plate and inherent strata[J]. Journal of Ship Production, 1994, 10(1 ): 59-67.
  • 5UEDA Y, MURAKAWA H, MOHAMED A, OKUMOTO Y, et al. Development of computer-aided process planning system for plate bending by line heating (report 2): Practice for plate bending in shipyard viewed from aspect of inherent strain[J]. Journal of Ship Production, 1994, 10(4): 239-247.
  • 6UEDA Y, MURAKAWA H, MOHAMED A, OKUMOTO Y, et al. Development of computer-aided process planning system for plate bending by line heating (report 3): Relation between heating condition and deformation[J]. Journal of Ship Production, 1994, 10(4): 248-257.
  • 7UEDA Y, MURAKAWA H, MOHAMED A, OKUMOTO Y, et al. Development of computer-aided process planning system for plate bending by line heating (report 4): Decision making on heating conditions, location and direction[J]. Transaction JWRI, 1993, 22(2): 305-313.
  • 8ISAO N, et al. A simulation analysis on the thermal elasto-plastic deformation of steel Plate by high frequency reduction heating[J]. Journal of the Society of Naval Architects of Japan, 1993, (174):535-542
  • 9YOSHIHIKO T, et al. Automated line heating for plate forming by HIH-ALPHA system and its application to construction of actual vessels[J]. Journal of the Society of Naval Architects of Japan, 2003,(193): 85-95.
  • 10JANG C D, KIM H K, HA Y S. Prediction of plate bending by high--frequency reduction heating[J]. Journal of Ship Production, 2002, 18(4):226-236.

二级参考文献12

  • 1刘玉君,董守富,林哲.水火弯板焰道布置设计优化[J].造船技术,1993(9):6-10. 被引量：8
  • 2沈庆通.感应器节能与制造新技术.全国五届热处理节能会议论文集[M].,.185.
  • 3沈庆通，全国五届热处理节能会议论文集，185页
  • 4Robert S Ruffini，1993年北京国际热处理展览会专题报告
  • 5Toshihatu Nomoto, et al. Development of simulation for plate bending by line-heating[J]. Journal of the Society of Naval Architects of Japan, 1990,12(168) : 527-535.
  • 6Toshiharu Nomoto, et al. Development of simulation for plate by line-heating considering in-plane shrinkage[J].Journal of the Society of Naval Architects of Japan, 1991,12(170): 599-607.
  • 7Isao Neki, et al. A simulation analysis on the thermal elasto-plastic deformation of steel plate by high frequency induction heating[J]. 日本造船学会论文集 ,1993,12(174): 535-542.
  • 8Yukio Ueda, et al. Development of computer aided process planning system for plate bending by line-heating (3rd Report) relation between heating condition and deformations [J]. Journal of the Society of Naval Architects of Japan, 1993,6(173): 409-431.
  • 9Chang-Doo Jang, et al. Prediction of plate bending by high-frequency induction heating[J]. Journal of Ship Production, 2002, 18(4): 226-236.
  • 10Lian Gong, et al. A new approach to the nonlinear eddy current field coupled to the nonlinear heat transfer[J]. IEE Transactions on Industry Applications, 1995, 31(4).

共引文献53

同被引文献26

引证文献3

二级引证文献3

中国造船
2009年 第1期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部