摘要
为实现对远端分布式现场设备进行测控,提出了一种基于嵌入式平台和无线通信技术的设计方案。该方案采用有线网与无线网结合的两级组网方式,通过CAN总线和CC1100无线传输模块,进行测控信息的搜索和分发,完成测控信息传递。现场测试结果表明:测控系统设计方案合理,开发成本优于同类相关技术。该系统为嵌入式系统的网络应用和短距离无线通信的扩展应用提供了参考。
In order to realize the monitoring and controlling of the equipments on the remote distributed spot with high qualities, a design based on embedded platform and wireless communication technology was proposed. The system combined the wired network with the wireless network. By using CAN bus and CC1100 wireless transmission modules, information was searched and distributed, then data transmission and command control to the remote wireless modules can be carried out. The testing results show that this design is reasonable and the development cost is lower than other similar design. Meanwhile, the system provides a reference of using embedded system in the network application and the short-range wireless communications in the extended application.
出处
《仪表技术与传感器》
CSCD
北大核心
2009年第2期53-55,共3页
Instrument Technique and Sensor
基金
广西区科技攻关项目(桂科攻:0428007-9)
