期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

Successive Boronizing and Austempering for GGG-40 Grade Ductile Iron 被引量：4

Successive Boronizing and Austempering for GGG-40 Grade Ductile Iron
原文传递
导出
摘要 Boronizing and austempering were successively applied to a GGG-40 grade ductile iron in order to combine the advantages of both process in a single treatment. This new procedure formed a 30 μm thick boride layer on the surface with subsurface matrix structure consisted of acicular ferrite and retained austenite. Reciprocating wear tests showed that successive boronizing and austempering exhibited considerably higher wear resistance than conventional boronizing having a subsurface matrix structure consisting of ferrite and pearlite. Boronizing and austempering were successively applied to a GGG-40 grade ductile iron in order to combine the advantages of both process in a single treatment. This new procedure formed a 30 μm thick boride layer on the surface with subsurface matrix structure consisted of acicular ferrite and retained austenite. Reciprocating wear tests showed that successive boronizing and austempering exhibited considerably higher wear resistance than conventional boronizing having a subsurface matrix structure consisting of ferrite and pearlite.
作者 Murat Baydogan Seckin Izzet Akray
机构地区 Department of Metallurgy and Materials Engineering
出处 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2009年第2期50-54,共5页
关键词 austempered ductile iron BORONIZING heat treatment wear austempered ductile iron boronizing heat treatment wear
分类号 TG156 [金属学及工艺—热处理]
  • 相关文献

参考文献11

  • 1Yen-Hung Tan,Shy-Ing Yu,Ji-Liang Doong,Jiun-Ren Hwang.Abrasive wear property of bainitic nodular cast iron in laser processing[J].Journal of Materials Science.1990(9)
  • 2Zi mba J,Samandi M,Yu D,et al.Unlubricated Sliding Wear Performance of Unalloyed Austempered Ductile Iron Under High Contact Stresses[].Materials and Design.2004
  • 3Amirsadeghi A,Sohi M H.Comparison of the Influence of Molybdenumand Chromium TIG Surface Alloying on the Mi- crostructure , Hardness and Wear Resistance of ADI[].Journal of Materials.2008
  • 4Atik E,Yunker U,Meric C.The Effects of Conventional Heat Treat ment and Boronizing on Abrasive Wear and Corro- sion of SAE 1010 ,SAE1040 , D2 and 304 Steels[].Tribol- ogy International.2003
  • 5Yalcin Y,Yazici A M.The Effect of Boro-Tempering Heat Treat ment on the Properties of Ductile Cast Iron[].Kovove Materialy-Metallic Materials.2007
  • 6Akray S I.The Effect of Coatings on Wear Characteristics of Spheroidal Graphite Cast Iron[]..2007
  • 7Bayer R G.Mechanical Wear Prediction and Prevention [ M][]..1994
  • 8Johansson M.Austenitic - bainitic ductile iron[].AFS Transactions.1977
  • 9Dodd J et at.High Strength, High Ductility, Ductile Irons[].Modern Casting.1978
  • 10Janowak J F,Gundlach R B.Development of a Ductile Iron for Commercial Austempering[].AFS Transactions.1983

同被引文献20

  • 1史光远.ADI齿轮渗硼及等温淬火工艺[J].水利电力机械,2004,26(3):26-28. 被引量：1
  • 2G.S.Cho,K.H.Choe,K.W.Lee,A.Ikenaga.Effects of Alloying Elements on the Microstructures and Mechanical Properties of Heavy Section Ductile Cast Iron[J].Journal of Materials Science & Technology,2007,23(1):97-101. 被引量：14
  • 3KAZEMI M. Investigation of microstructural and mechanical properties of austempered steel bar-reinforced ductile cast iron composite[Jl. Materials and design, 2014(53): 1 047-1 051.
  • 4PUTATUNDA S K. Development of austempered ductile cast iron(ADI) with simultaneous high yield strength and fracture toughness by a novel two-step austempering process. Materials Science and Engineering: A, 2001,315:70-80.
  • 5KAYALI Y, YAL(~IN Y. The effects of boro-tempering heat treatment on microstructural properties of ductile iron [ J ]. Materials & Design, 2001,32 (3) : 1 414-1 419.
  • 6KAYALI Y, YAL(~IN Y, TAKTAK S. Adhesion and wear properties of boro-tempered ductile iron[ J]. Materials and design, 2011(32) : 4 295-4 303.
  • 7LEFEVRE J, HAYRYNEN K L. Austempered materials for powertrain applications [ J ] .Journal of materials engineering and performance, 2013, 22(7) : 1 914-1 922.
  • 8PETROVA R S, SUWATTANANONT N, SAMARDZIC V. The Effect of Boronizing on Metallic Alloys for Automotive Applications [J].Journal of Materials Engineering and Performance, 2007,17 (3) :340-345.
  • 9SEN S, SEN U, BINDAL C. The growth kinetics of borides formed on boronized AISI 4140 steel [ J ]. Vacuum, 2005,77 ( 2 ) : 195-202.
  • 10OZDEMIR O. An investigation on boriding kinetics of AISI 316 stainless steel[J].Vacuum, 2009,83 ( 1 ) : 175-179.

引证文献4

二级引证文献5

Journal of Iron and Steel Research International
2009年 第2期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部