摘要
本文提出了一种基于DGS(Defected Ground structure)的不等功分威尔金森功分器的设计,实现了1GHz-2GHz频段内不等功分比为1:5。由于加工工艺的限制,微带线的特性阻抗最高只能做到120Ω-130Ω。在接地板上的DGS引入了附加的等效电容和等效电感,这样使得微带线能够实现高于180Ω的特性阻抗。本文针对未加载DGS和加载DGS的威尔金森功分器均做了HFSS仿真,均实现了1:5的功分比。
The design of unequal Wilkinson power divider which is based on DGS is proposed in this paper.1:5 power dividing ratio is realized in the range of 1GHz-2GHz.As the process technology limits the maximum characteristic impedance of the microstrip line can be 120Ω-130Ω.The DGS on the ground plane provides an additional effective capacitive and effective inductive components to the microstrip line.This enables the microstrip line to be realized with very high impedance of over 180Ω.The dividers with DGS and without DGS are both made simulation by HFSS,having achieved the power dividing ratio to be 1:5.
出处
《微波学报》
CSCD
北大核心
2010年第S1期262-264,共3页
Journal of Microwaves
关键词
DGS
不等功分
威尔金森功分器
DGS
unequal power divider
Wilkinson power divider