期刊文献+

偏心支撑半刚接钢框架的模态分析 被引量:3

Modal analysis of eccentrically braced semi-rigid steel frames
原文传递
导出
摘要 将偏心支撑与半刚接钢框架相结合,是一种新型的框架支撑体系。偏心支撑可以弥补半刚接钢框架的刚度不足,同时又不降低其延性和耗能能力。运用ANSYS有限元分析软件,建立了4榀6层的半刚接钢框架(1榀框架无偏心支撑,3榀框架有偏心支撑)有限元模型,对框架试件进行模态分析。研究节点初始刚度、支撑条件等因素对框架自振周期的影响。根据分析得出:偏心支撑半刚接钢框架的刚度主要由支撑提供,梁柱的半刚性连接对结构的自振周期无显著影响。在相同参数下,支撑类型对结构自振周期有影响。 There formed a new type of braced resistant steel frame,which combined eccentrically braces and steel frames with semi-rigid connections.Eccentrically braces increase the lateral stiffness of steel frames with semi-rigid connections and meanwhile maintain its ductility and energy dissipations.ANSYS was employed to model semi-rigid steel frames with four different support types.Modal analysis of the frames was studied to investigate the dynamic property of eccentrically braced semi-rigid steel frames,which was influenced by rotational stiffness of connections,eccentrically braced type and so on.It is concluded that the stiffness of eccentrically braced semi-rigid steel frames is supported mainly by the supports.The semi-rigid connection has no significant effect on the natural cycle.The types of eccentrically braced have effect in the same parameters.
出处 《建筑结构》 CSCD 北大核心 2010年第S1期187-190,共4页 Building Structure
关键词 偏心支撑钢框架 半刚性连接 ANSYS 模态分析 eccentrically braced steel frame semi-rigid connection ANSYS modal analysis
  • 相关文献

参考文献13

二级参考文献43

  • 1刘小强,吴惠弼.半刚性连接钢框架位移和内力的计算[J].重庆建筑工程学院学报,1993,15(2):46-55. 被引量:9
  • 2刘伟,王仁义,张念征.多层住宅新型复合结构的固有频率计算分析[J].世界地震工程,2005,21(3):131-134. 被引量:4
  • 3克拉夫RW 彭津J.结构动力学[M].北京:科学出版社,1981..
  • 4[1]Youssef N et al. A survey of moment-resisting frame buildings affected by the 1994 Northridge Earthquake [R] .National Institute of Standard and Technology, Gaithersburg, MD,1995
  • 5[2]Architectural Institute of Japan. Reconnaissance report on damage to steel building structures observed from the 1995Hyogoken-Nanhu (Hanshin/Awaji) Earthquke [R]. May,1995
  • 6[3]Astaneh-asl A. Seismic performance and design of bolted steel moment-resisting frames [J]. Engineering Journal, AISC,1999, Vol. 36 (3):105~120
  • 7[4]Archibald N S and Mohammed R B. 3D Simulation of end-plate bolted connections [J]. Journal of Structural Engineering,ASCE, 1994, 120 (11):3122~3136
  • 8[5]Paker J A and Morris L J. A limit state design method for the tension region of bolted beam-colurnn connections [J]. Structural Engineering, 1977, 55(10):446~458
  • 9[6]Hendrik R A and Murray T M. Column web compression strength at end-plate connections [J]. Engineering Journal AISC, 1984, 21 (3):161~169
  • 10[7]Mohammed R B and Archibald N S. 3D simulation of bolted connections to unstiffened column-Ⅱ: extended end-plate connections [J]. Journal of Constructional Steel Research,1997, 40 (3):189~223

共引文献169

同被引文献29

引证文献3

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部