摘要
Unsteady static pressure was measured and time-accurate numerical simulations were conducted in order to analyze unsteady behaviour of the centrifugal compressor diffuser. The unsteady static pressure was measured at the diffuser inlet and outlet at three different circumferential positions. Operation points near the surge, the design operation point and operation point near the choke were used in measurements. The time-accurate simulations were conducted at the design operation point and operation point near the choke. The whole compressor was modelled and the low Reynolds number k-εturbulence model was utilized in numerical simulations. The gathered numerical and experimental unsteady pressures were compared with each other.
Unsteady static pressure was measured and time-accurate numerical simulations were conducted in order to analyze unsteady behaviour of the centrifugal compressor diffuser. The unsteady static pressure was measured at the diffuser inlet and outlet at three different circumferential positions. Operation points near the surge, the design operation point and operation point near the choke were used in measurements. The time-accurate simulations were conducted at the design operation point and operation point near the choke. The whole compressor was modelled and the low Reynolds number k-? turbulence model was utilized in numerical simulations. The gathered numerical and experimental unsteady pressures were compared with each other.
Keywords centrifugal compressor - vaneless diffuser - unsteady pressure
CLC number TK474.8+2
