摘要
WT5”BZ]In this study, by considering the scale ratio related to the specific gravity of the submerged bed material, and introducing a degree of distortion, n the similarity laws for a distorted river model with a movable bed were derived under the conditions that the values of dual dimensionless parameters in a regime-criterion diagram for the bars are the same in a model as they are in a prototype, and that a resistance law such as the Manning-Strickler-type formula is to be valid for a model and a prototype. The usefulness of the similarity laws derived in this study was verified by comparing the bed forms from the distroted model experiments with the bed forms from the 1/50-scale undistorted model experiments, which were performed by the Hokkaido Development Bureau (H. D. B.), Japan, to examine the tentative plan for the improvement of a low-flow channel in the Chubetsu River, which is a tributary of the Ishikari River. It is considered that the distorted model experiments to be valid with either sand or lightweight bed material. [WT5”HZ]
WT5”BZ]In this study, by considering the scale ratio related to the specific gravity of the submerged bed material, and introducing a degree of distortion, n the similarity laws for a distorted river model with a movable bed were derived under the conditions that the values of dual dimensionless parameters in a regime-criterion diagram for the bars are the same in a model as they are in a prototype, and that a resistance law such as the Manning-Strickler-type formula is to be valid for a model and a prototype. The usefulness of the similarity laws derived in this study was verified by comparing the bed forms from the distroted model experiments with the bed forms from the 1/50-scale undistorted model experiments, which were performed by the Hokkaido Development Bureau (H. D. B.), Japan, to examine the tentative plan for the improvement of a low-flow channel in the Chubetsu River, which is a tributary of the Ishikari River. It is considered that the distorted model experiments to be valid with either sand or lightweight bed material. [WT5”HZ]
