期刊文献+

Development of serial bio-shock tubes and their application 被引量:2

Development of serial bio-shock tubes and their application
原文传递
导出
摘要 This study has won the First Prize of National Sci Tech Progress in 1992. Objective To design and produce serial shock tubes and further examine their application to experimental studies on blast injury. Methods Bio medical engineering technique was used for the design and development of the serial shock tubes. One thousand four hundred and fifty nine animals (757 rats, 105 guinea pigs, 335 rabbits, 240 dogs and 22 sheep) were then used to test the wounding effects of the shock tubes. Results Three types of bio shock tubes, that is, large , medium and small scale shock tubes were made in our laboratory. The large scale shock tube is 39 meters long; the inner diameter of the test section is 1 meter; and the maximum overpressure in the driving section is 10.3 MPa. A negative pressure could be formed by means of the reflected rarefactive wave produced by the end plate. The medium scale shock tube is 34.5 meters long; the maximum overpressure in the driving section is 22 MPa; the test section is designed to be a knockdown, showing 5 basic types with inner diameter of 77 to 600 millimeters, which could be used for researches on overpressure, explosive decompression, underwater explosion, and so on. The small scale shock tube is 0.5 meter long with the maximum endured overpressure of 68.6 MPa. Results from animal experiments showed that this set of shock tubes could induce various degrees of systemic or local blast injury in large or small animals. Conclusions This set of bio shock tubes can approximately simulate typical explosive wave produced by nuclear or charge explosion, and inflict various degrees of blast injury characterized by stability and reproducibility. Therefore, they can meet the needs of blast research on large and small animals. Abstract This study has won the First Prize of National Sci Tech Progress in 1992. Objective To design and produce serial shock tubes and further examine their application to experimental studies on blast injury. Methods Bio medical engineering technique was used for the design and development of the serial shock tubes. One thousand four hundred and fifty nine animals (757 rats, 105 guinea pigs, 335 rabbits, 240 dogs and 22 sheep) were then used to test the wounding effects of the shock tubes. Results Three types of bio shock tubes, that is, large , medium and small scale shock tubes were made in our laboratory. The large scale shock tube is 39 meters long; the inner diameter of the test section is 1 meter; and the maximum overpressure in the driving section is 10.3 MPa. A negative pressure could be formed by means of the reflected rarefactive wave produced by the end plate. The medium scale shock tube is 34.5 meters long; the maximum overpressure in the driving section is 22 MPa; the test section is designed to be a knockdown, showing 5 basic types with inner diameter of 77 to 600 millimeters, which could be used for researches on overpressure, explosive decompression, underwater explosion, and so on. The small scale shock tube is 0.5 meter long with the maximum endured overpressure of 68.6 MPa. Results from animal experiments showed that this set of shock tubes could induce various degrees of systemic or local blast injury in large or small animals. Conclusions This set of bio shock tubes can approximately simulate typical explosive wave produced by nuclear or charge explosion, and inflict various degrees of blast injury characterized by stability and reproducibility. Therefore, they can meet the needs of blast research on large and small animals.
出处 《Chinese Medical Journal》 SCIE CAS CSCD 1998年第2期13-17,共5页 中华医学杂志(英文版)
  • 相关文献

同被引文献22

引证文献2

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部