CALCULATION MODEL OF SURFACE TENSION FOR ALLOY MELTS 被引量：2

CALCULATION MODEL OF SURFACE TENSION FOR ALLOY MELTS

下载PDF

导出

摘要１ＩＮＴＲＯＤＵＣＴＩＯＮＩｔｉｓｏｆｇｒｅａｔｉｍｐｏｒｔａｎｃｅｆｏｒｔｈｅｅｓｔｉｍａｔｉｏｎｏｆｓｕｒｆａｃｅｔｅｎｓｉｏｎｆｏｒａｌｏｙｍｅｌｔ．Ｍａｎｙｍｅｔａｌｕｒｇｙｐｈｅｎｏｍｅｎａ，ｓｕｃｈａｓＣＯｂｕｂｂｌｅｓｇｅｎｅｒａｔｉ... Based on the coexistence theory of metal melt involving compound formation and Butler's equation, a new model was proposed for the calculation of surface tension of alloy melt. This model established a specific correlation between the surface tension and mass action concentrations(activities) of bulk melt and surface melt on the basis of surface and bulk melt structures. It was shown that the calculated surface tensions for Fe Si, Fe Al alloy melt are in good agreement with the measured results. Furthermore, iso surface tension lines for Fe Si Al alloy melt were also calculated.

作者 Cheng, Guoguang Liao, Nengbin

机构地区 Univ of Science and Technology

出处《中国有色金属学会会刊：英文版》 EI CSCD 1998年第3期155-160,共6页 Transactions of Nonferrous Metals Society of China

关键词 ALLOY MELT SURFACE tension activity MASS action CONCENTRATION alloy melt surface tension activity mass action concentration

分类号 TG14 [金属学及工艺—金属材料] TG14 [金属学及工艺—金属材料]

引文网络
相关文献

同被引文献13

1J. Zhang (Metallurgical Engineering School, University of Science and Technology Beijing, Beijing 100083, China).THE APPLICATION OF THE LAW OF MASS ACTION IN COMBINATION WITH THE COEXISTENCE THEORY OF SLAG STRUCTURE TO THE MULTICOMPONENT SLAG SYSTEMS[J].Acta Metallurgica Sinica(English Letters),2001,14(3):177-190. 被引量：14
2崔传孟,徐秀光,张显鹏,王魁汉,韩维儒.B_2O_3－MgO－SiO_2－Al_2O_3－CaO系渣组成对熔体物性的影响[J].金属学报,1996,32(6):637-641. 被引量：7
3Cheng Guoguang,Liao Nengbin.Calculation Model for Surface Tension of Slag Melt[J].Journal of Iron and Steel Research International,1999,6(2):17-20. 被引量：8
4李杰,樊占国,刘艳丽,刘素兰,姜涛,奚正平.Preparation of boric acid from low-grade ascharite and recovery of magnesium sulfate[J].Transactions of Nonferrous Metals Society of China,2010,20(6):1161-1165. 被引量：5
5李杰,樊占国.富硼渣钠化法制备硼砂的实验研究[J].材料科学与工艺,2011,19(1):144-148. 被引量：10
6王广,王静松,薛庆国,丁银贵.MgO-B_2O_3二元系熔渣质量作用浓度计算模型[J].中国有色金属学报,2011,21(12):3143-3148. 被引量：6
7姜涛,薛向欣.Synthesis of (Ca, Mg)-α′-Sialon-AlN-BN powders from boron-rich blast furnace slag by microwave carbothermal reduction-nitridation[J].Transactions of Nonferrous Metals Society of China,2012,22(12):2984-2990. 被引量：3
8吴铖川,成国光,马琦琦.CaF_2-CaO-Al_2O_3-MgO-SiO_2渣系表面张力计算模型[J].上海金属,2014,36(3):33-36. 被引量：6
9Li-li YANG,Hong-ming WANG,Xiang ZHU,Gui-rong LI.Effect of Boron Mud and CaF_2 on Surface Tension and Density of CaO-SiO_2-B_2O_3 Ternary Slag Systems[J].Journal of Iron and Steel Research International,2014,21(8):745-748. 被引量：7
10Xiao-jiao FU,Jia-qi ZHAO,Shuang-yin CHEN,Zheng-gen LIU,Tong-lai GUO,Man-sheng CHU.Comprehensive Utilization of Ludwigite Ore Based on Metallizing Reduction and Magnetic Separation[J].Journal of Iron and Steel Research International,2015,22(8):672-680. 被引量：4

引证文献2

1许继芳,李建朝,翁文凭,盛敏奇,陈栋,张捷宇,陈瑶.Mgo-B_2O_3-SiO_2-CaO-Al_2O_3体系富硼渣表面张力的计算[J].中国有色金属学报,2017,27(1):206-214. 被引量：1
2许继芳,陈栋,翁文凭,盛敏奇,张捷宇,吕凡.富硼渣MgO-B_2O_3-SiO_2-FeO体系表面张力计算[J].中南大学学报（自然科学版）,2017,48(6):1413-1419.

二级引证文献1

1高毅,姚凯,张海丹,刘丹,杨冬.1000 MW超超临界锅炉折焰角斜坡积灰与塌灰计算分析[J].洁净煤技术,2019,25(2):114-119. 被引量：3

1Dayong LI,Dequan SHI,Feng LI,Yutong ZHANG,Jingwei DONG.A new method of fast measuring surface tension of melt cast iron and its application in graphite shape identification[J].China Foundry,2005,2(1):34-37.
2李培杰,刘树勋,曾大本,贾均,李庆春.Thermodynamics of effect of modification on microstructure of Al-Si alloy melt[J].中国有色金属学会会刊：英文版,2000,10(3):382-385. 被引量：1
3余音宏,李晓闲,李平,张雪辉,陈星斌.低碳钒微合金直接淬火钢组织与性能[J].材料热处理学报,2016,37(7):55-60. 被引量：1
4添加Al对Ti—20mass%V合金等时效的影响[J].钛合金信息,1995(5):10-11.
5王福明,李文超,张宁欣,韩其勇.Model Calculation of ln γ_i^0 for Solute Elements in Copper-base Alloy Systems[J].Rare Metals,1998,17(4):48-53.
6Qiang LI and Yongbo XU(State Key Laboratory for Fatigue and Fracture of Materials, Institute of Metal Research, Chinese Academy of Sciences,Shenyang 110015, China) To whom correspondence should be addressed Present address: Analysis Cener, School of Mater.A Model of Dynamic Recrystallization in Alloys during High Strain Plastic Deformation[J].Journal of Materials Science & Technology,1999,15(5):435-438. 被引量：7
7陆德平,王俊,A. Atrens,邹兴权,陆磊,孙宝德.Calculation of Cu-rich part of Cu-Ni-Si phase diagram[J].中国有色金属学会会刊：英文版,2007,17(A01):12-15. 被引量：1
8Wang Ligang,Zheng Lijing,Cui Renjie,Yang Lili,Zhang Hu.Microstructure and mechanical properties of cast Ti-47Al-2Cr-2Nb alloy melted in various crucibles[J].China Foundry,2012,9(1):48-52. 被引量：2
9单玉郎,文九巴,姚怀,贺俊光,雷少帆.固溶处理对Mg-0.5Zn-0.4Zr-5Gd生物镁合金组织和性能的影响[J].材料热处理学报,2016,37(10):90-95. 被引量：6
10Du,Ting,Li, Guodong(Central Iron and Steel Research Institute, Beijing 100081).THERMODYNAMICS　OF　Cu-Y-M(M=Al,Si,Ti,Fe)LIQUID　SOLUTIONS[J].中国有色金属学会会刊：英文版,1994,4(4):16-19.

中国有色金属学会会刊：英文版

1998年第3期

浏览历史

内容加载中请稍等...

CALCULATION MODEL OF SURFACE TENSION FOR ALLOY MELTS 被引量：2

同被引文献13

引证文献2

二级引证文献1

相关作者

相关机构

相关主题

浏览历史