期刊文献+

A THEORY OF DETERMINING MASS TRANSFERPARAMETERS FOR WOOD PARTICLE MATERIALS

A THEORY OF DETERMINING MASS TRANSFERPARAMETERS FOR WOOD PARTICLE MATERIALS
下载PDF
导出
摘要 The transient mass transter processes in the natural drying of wood particle materials were experimental;y studied A new theory tio determme the mass transfer parameters in the Materials was developed in terms of gradient transformation method(GTM).By making use of GTM.Thewater vapour diffusion coefficient and the surtaee emission coefficent of wood chip were expermentally determined both in air phase and in solid phase.It Was found that the internal resistance to water vapour diffusion in the air phase of wood partiele aggregates is around ten to the third power as large as that in common air The drag coefficient was given to quantify the effect The phenomenon of undersurface diffusion in wood partiele bed was quantitatively modelled.The dimensionless Fourier snumber and the Biot's number for mass transfer were theoretically derived.The study showed that Biot's number for the problem investigated was the ratio of the characteristie length of wood partiele bed to the penetrating depth of the undersurface.An analytical solution of the nonlinear goveming equation for water transport process in the aggregates of wood chip was obtained by introducing the variable coefficients measured in the study into the governing equation.The comparison between the analytical solution and the observed moisture content of wood chip showed that the deviation was less than ±7%.The thermophysieal properties of wood particle materials are little known at present.The knowledge provided in the paper will be and in the handling.researeh or engineering application of wood chip.wood shavingsete. The transient mass transter processes in the natural drying of wood particle materials were experimental;y studied A new theory tio determme the mass transfer parameters in the Materials was developed in terms of gradient transformation method(GTM).By making use of GTM.Thewater vapour diffusion coefficient and the surtaee emission coefficent of wood chip were expermentally determined both in air phase and in solid phase.It Was found that the internal resistance to water vapour diffusion in the air phase of wood partiele aggregates is around ten to the third power as large as that in common air The drag coefficient was given to quantify the effect The phenomenon of undersurface diffusion in wood partiele bed was quantitatively modelled.The dimensionless Fourier snumber and the Biot's number for mass transfer were theoretically derived.The study showed that Biot's number for the problem investigated was the ratio of the characteristie length of wood partiele bed to the penetrating depth of the undersurface.An analytical solution of the nonlinear goveming equation for water transport process in the aggregates of wood chip was obtained by introducing the variable coefficients measured in the study into the governing equation.The comparison between the analytical solution and the observed moisture content of wood chip showed that the deviation was less than ±7%.The thermophysieal properties of wood particle materials are little known at present.The knowledge provided in the paper will be and in the handling.researeh or engineering application of wood chip.wood shavingsete.
出处 《Journal of Northeast Forestry University》 SCIE CAS CSCD 1996年第3期50-57,共8页
关键词 Diffusion coefficient Drag coefficient Gradient transformation method (GTM) Surface emission coefficient Undersurface diffusion Water transport process Wood Particle materials Diffusion coefficient,Drag coefficient,Gradient transformation method (GTM),Surface emission coefficient,Undersurface diffusion,Water transport process,Wood Particle materials
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部