期刊文献+

Sintering Formation of Low Temperature Phase MnBi and Its Disordering in Mechanical Milling

Sintering Formation of Low Temperature Phase MnBi and Its Disordering in Mechanical Milling
下载PDF
导出
摘要 With X-ray diffraction and DSC analysis, it is found that 4 cycles of sintering at 593 K are necessary for the complete production of the low-temperature phase (LTP) MnBi. The c/a of the fabricated LTP MnBi is 1.4286. Metastable phase MnBip formed in primary sintering stage of LTP MnBi has the similar crystal structure and lattice constant with the quenched high-temperature phase (HTP) Mn1.08Bi. The structural differences between MnBip phase and Mn1.08Bi phase are discussed. The LTP MnBi phase is unstable for strong mechanical milling as Bi appears after milling over 7200 s in the present milling condition. Strains caused by the mechanical attrition are difficult to accumulate in the MnBi crystals, and the crystal size of the milled MnBi is only 30 nm before the presence of grains coalescence. The whole milling process can be classified into 3 stages indicated by the structural changes. Based on the structural parameter calculation, the changes of atomic configurations in every stage have been discussed. The existence of Bi equivalent vacancy site is considered to play an important role in the disordering processes of Mn and Bi atoms. With X-ray diffraction and DSC analysis, it is found that 4 cycles of sintering at 593 K are necessary for the complete production of the low-temperature phase (LTP) MnBi. The c/a of the fabricated LTP MnBi is 1.4286. Metastable phase MnBip formed in primary sintering stage of LTP MnBi has the similar crystal structure and lattice constant with the quenched high-temperature phase (HTP) Mn1.08Bi. The structural differences between MnBip phase and Mn1.08Bi phase are discussed. The LTP MnBi phase is unstable for strong mechanical milling as Bi appears after milling over 7200 s in the present milling condition. Strains caused by the mechanical attrition are difficult to accumulate in the MnBi crystals, and the crystal size of the milled MnBi is only 30 nm before the presence of grains coalescence. The whole milling process can be classified into 3 stages indicated by the structural changes. Based on the structural parameter calculation, the changes of atomic configurations in every stage have been discussed. The existence of Bi equivalent vacancy site is considered to play an important role in the disordering processes of Mn and Bi atoms.
机构地区 KONAN UNIV
出处 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 1996年第5期335-341,共7页 材料科学技术(英文版)
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部