STRESSES AND DISPLACEMENTS IN ORTHOTROPIC LONG STRIP LOADED BY SYMMETRIC LOCAL UNIFORM FORCES

STRESSES AND DISPLACEMENTS IN ORTHOTROPIC LONG STRIP LOADED BY SYMMETRIC LOCAL UNIFORM FORCES

下载PDF

导出

摘要ＳＴＲＥＳＳＥＳＡＮＤＤＩＳＰＬＡＣＥＭＥＮＴＳＩＮＯＲＴＨＯＴＲＯＰＩＣＬＯＮＧＳＴＲＩＰＬＯＡＤＥＤＢＹＳＹＭＭＥＴＲＩＣＬＯＣＡＬＵＮＩＦＯＲＭＦＯＲＣＥＳＳＴＲＥＳＳＥＳＡＮＤＤＩＳＰＬＡＣＥＭＥＮＴＳＩＮＯＲＴＨＯＴＲＯＰＩＣＬＯＮＧＳＴＲ... Nowadays composite materials much used in industry are orthotropic. This article introduces the expressions of components of stresses and components of displacements in a rectangular plate or an infinitely long strip which consists of these materials and is loaded by local uniform forces symmetrically at upper and lower edges.

作者 Li, Kedi

机构地区 Central South Univ of Technology

出处《中国有色金属学会会刊：英文版》 EI CSCD 1994年第2期52-55,共4页 Transactions of Nonferrous Metals Society of China

关键词 ORTHOGONAL anisotropic material function of STRESS coinponents of displacementcomponents of STRESS Anisotropy Composite materials Elasticity Numerical methods Stresses Strip metal

分类号 TG3 [金属学及工艺—金属压力加工]

引文网络
相关文献

1张法亮,罗永春,阎汝煦,陈剑虹.Effect of Rare Earth Elements on Structure and Electrochemical Properties of PuNi_3-type Hydrogen Storage Alloys[J].Journal of Rare Earths,2005,23(S1):343-349.
2戴天臻.RTH公司的表面和形状测量仪器[J].云南标准计量与质量,1992(4):25-27.
3Hou, Saizhang,Liu, Ximing (Department of Materials Science and Engineering,Central South University of Technology, Changsha 410083).WELDABILITY OF Cu-W ALLOY AND COPPER USING FRICTON WELDING METHOD[J].中国有色金属学会会刊：英文版,1995,5(3):136-139.
4ZHENG Chun,GU Tong (Department of Mechanical Engineering, McMaster University, Canada) (Applied Science School, University of Science and Technology Beijing, Beijing 100083, China).Temperature distribution in the tool-chip-workpiece system during the orthogonal cutting process[J].International Journal of Minerals,Metallurgy and Materials,1997,11(3):30-34.
5Zhao, Jiuzhou, Guo, Jingjie, Jia, Jun, Li, Qingchun.SOLIDIFICATION　OF　Zn－Pb　ALLOY　UNDER　SIMULANT　MICROGRAVITY　CONDITION　OF　ORTHOGONAL　ELECTRIC　AND　MAGNETIC　FIELDS[J].中国有色金属学会会刊：英文版,1995,5(3):105-108.
6郑之旺,陈杰,王平利.Ti-IF钢热镀锌钢板力学性能控制[J].钢铁钒钛,2006,27(3):1-4. 被引量：5
7房大庆,邓庆东,王宇,张雅琴,张晓茹,张云飞,柴跃生.Mg-1.5Mn-1.5Y-3Sn合金显微组织及力学性能研究[J].新技术新工艺,2013(6):108-112. 被引量：2
8袁平,柯映林.Effects of tool flank wear on orthogonal cutting process of aluminum alloy[J].中国有色金属学会会刊：英文版,2006,16(A03):1562-1569.
9Zhou, Weixian, Zhou, Xin.DETERMINATION　OF　STATES　OF　STRESS　AND　STRAIN　AT　POLE　OF　HYDRAULIC　BULGE　ORTHOTROPIC　SHEET　SAMPLE[J].中国有色金属学会会刊：英文版,1995,5(3):84-87.
10戴天臻.RTH公司的新型园度仪[J].云南标准计量与质量,1993(1):13-16.

中国有色金属学会会刊：英文版

1994年第2期

浏览历史

内容加载中请稍等...

STRESSES AND DISPLACEMENTS IN ORTHOTROPIC LONG STRIP LOADED BY SYMMETRIC LOCAL UNIFORM FORCES

相关作者

相关机构

相关主题

浏览历史