摘要
Combining speckle interferometry with photoelasticity,the absolute retardation fringes in 3-D model are obtained by interference of the polarized rays reflected from the two surfaces of a sandwiched plate inside the model.This method can avoid the troubles introduced by Poisson's ratio μ=0.5 and stress-optical constants ratio A/B=-2 of the photoelastic material in a stress-frozenstate,and yield the re- sults which provide necessary supplementary information for the completely-experimental solution of 3-D stress state.A comparison of experimental results with theoretical ones shoves the feasibility of the method proposed in the present paper.
Combining speckle interferometry with photoelasticity,the absolute retardation fringes in 3-D model are obtained by interference of the polarized rays reflected from the two surfaces of a sandwiched plate inside the model.This method can avoid the troubles introduced by Poisson's ratio μ=0.5 and stress-optical constants ratio A/B=-2 of the photoelastic material in a stress-frozenstate,and yield the re- sults which provide necessary supplementary information for the completely-experimental solution of 3-D stress state.A comparison of experimental results with theoretical ones shoves the feasibility of the method proposed in the present paper.
基金
The project is supported by the National Natural Science Foundation of China.
