摘要
本文是在实验室条件下,用φ350×580mm炭制品试样,在小型浸渍罐中进行不同浸渍压力、加压时间、真密度、预热温度以及炭制品体积密度对浸渍效果影响的实验,从中优化最佳浸渍条件。
The carbon samples of 350 mm in diameter and 580mm long were impregnated in a small cyclinder in laboratory.Influence of various pressures, pressure time, vacuum,preheating temperature and bulk density on the impregnation results was investigated, by which the conditions of impregnation were optimized.
出处
《炭素技术》
CAS
CSCD
1989年第2期16-19,共4页
Carbon Techniques
