摘要
以Moldflow作为分析平台,根据某一型号汽车保险杠不同热流道浇注系统(进浇点的位置)的设置,比对分析填充情况、型腔注射位置压力分布、填充温度与熔接痕、冻结层厚度和顶出时的体积收缩率等流动模拟结果,找出了其中的优势方案。
Using Moldflow Platform, with a different hot runner system setting of a certain type automobile bumper, the fill time, pressure at injection location, weld lines and temperature at flow front, frozen layer fraction, volumetrie shrinkage at ejection were analyzed and compared, and the better project was adopted.
出处
《塑料工业》
CAS
CSCD
北大核心
2009年第4期35-38,共4页
China Plastics Industry
基金
南京工程学院2008年科研基金项目(KXJ08057)