期刊文献+

C/C刹车材料用抗氧化涂层性能 被引量:7

Properties of Anti-Oxidation Coatings for C/C Composites Aircraft Brakes
下载PDF
导出
摘要 研制了一种以磷酸、磷酸盐、硼化物等为原材料的磷酸盐涂料,在不同温度下烧结处理后,对其抗氧化性能及表面微观形貌进行研究。结果表明:650℃烧结的涂层氧化防护性能明显优于900℃烧结的;在700℃氧化30h后,最小氧化失重率仅为1.76%,氧化后涂层仍然保持完整致密;经过900℃、3min室温、2min循环30次和1100℃、3min室温、2min循环10次的连续热震后,失重率为1.97%,涂层与C/C基体结合良好,涂层的热性能稳定。 A kind of phosphatic coating used for carbon-carbon composites aircraft brakes was made from phosphoric acid, phosphate, boride and so on and treated at diffirent temperature. The properties of anti-oxidation and morphologies of coatings were studied at once. Results show that anti-oxidation properties of caotings treated at 650℃ were obviously higher than those treated at 900℃. The minimum weight loss was only 1.76% at 700℃ for 30 h in atmosphere. The surface of coating after oxidation was perfect and dense. Moreover, the weight loss percent of thermal shock circulated in air from 900℃ for 3 min to room temperature for 2 min for 30 times and from 1 100℃ for 3 rain to room temperature for 2 min for 10 times was 1.97%. This indicates that the phosphatic coating can provide excellent anti-oxidation properties and thermal shock resistance properties.
出处 《宇航材料工艺》 CAS CSCD 北大核心 2009年第1期49-52,共4页 Aerospace Materials & Technology
关键词 C/C刹车材料 抗氧化性能 磷酸盐涂层 氧化失重率 C/C composite, Anti-oxidation properties, Phosphate coating, Weight loss
  • 相关文献

参考文献12

  • 1王茂章.碳纤维及其复合材料[M].北京:科学出版社,1997..
  • 2Savage G. Carbon-carbon composite. London: Chapman & Hall Press, 1993 : 323 - 360.
  • 3Donald L S, Kenneth E D. Unique application of carboncarbon composite materials (part one ). SAMPE Journal, 1999 ; 35 (3) :27 -39.
  • 4Donald L S, Kenneth E D. Unique application of carboncarbon composite materials (part two). SAMPE Journal, 1999; 35(4) :51 -63.
  • 5Donald L S, Kenneth E D. Unique application of carboncarbon composite materials (part three). SAMPE Journal, 1999 ; 35(5) :47-55.
  • 6Bacos M P, Dorvaux J M, Lavigen O. C/C composite oxidation model ( I ) --Morphological experimental investigations. Carbon, 2000 ; 38:77- 92.
  • 7李贺军.炭 /炭复合材料[J].新型炭材料,2001,16(2):79-80. 被引量:257
  • 8杨尊社,卢刚认,曲德全,楼建军,赵文庆,潘亚萍.C/C复合材料的磷酸盐与硼系涂料的防氧化研究[J].材料保护,2001,34(3):12-13. 被引量:16
  • 9彭志刚,肖志超,苏君明等.防止碳/碳复合材料氧化的方法.中国专利,CN1544827A.
  • 10Wang Q. Effect of boron on graphite oxidation --A the- oretical study. Carbon,1997; 35:307 -313.

二级参考文献11

  • 1[1]Savage G. Carbon-carbon composites [M]. London: Chapman & Hall Press, 1992.
  • 2[5]Mckee D W, Spiro C L, Lamby E J. The inhibition of grahite oxidation by phosphorus additives [J]. Carbon,1984,22 (3) :285-290.
  • 3[6]Ehrburger P, Baranne P, Lahaye J. Inhibition of the oxidation of carbon-carbon composite by boron oxide [J]. Carbon,1986,24(4):495-499.
  • 4[7]陈嘉莆,谭光薰.磷酸盐的生产与应用[M].四川:成都科技大学出版社,1999:337-341.
  • 5杨尊社,新型碳材料,1999年,14卷,3期,53页
  • 6陈志军,中国航空科技文献 ,HJL 93 0 3 48,1页
  • 7V. I. Kostikov,S. A. Kolesnikov,E. I. Kholodilova,S. V. Vavilkina,A. N. Polilov,V. K. Khokhlov,G. M. Butyrin,A. P. Nabatnikov,I. P. Shepilov,A. N. Shurshakov. Effect of structure on the properties of fibrous carbon materials[J] 1981,Mechanics of Composite Materials(4):423~427
  • 8郭全贵,宋进仁,刘朗,张碧江.碳材料高温氧化防护陶瓷涂层体系研究进展[J].宇航材料工艺,1998,28(2):11-16. 被引量:26
  • 9蒋建纯,张白冰,易茂中,黄启忠.高能刹车盘非摩擦面的防护研究[J].新型炭材料,1998,13(4):40-45. 被引量:5
  • 10葛毅成,易茂中,黄伯云.粘结剂对C/C复合材料抗氧化涂层性能的影响[J].中南工业大学学报,2001,32(2):157-160. 被引量:4

共引文献265

同被引文献118

引证文献7

二级引证文献33

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部