基于均匀设计的冷却进度表参数设定

Parameter Establishment of Cooling Schedule Base on Uniform Design

冷却进度表参数设置通常是依据经验和试验确定,造成试验工作量大且难以得到最优的参数组合,影响了模拟退火算法的使用。通过将冷却进度表参数设定问题描述成均匀设计中多因素多水平的试验设计,从而能够用较少的试验很快设定算法参数的取值。仿真试验表明该方法的可行性和有效性。

In general the parameters of cooling schedule are determined by experience and experiment. This leads to heavy work load and difficult to obtain the optimal combination of the parameters and affects the use of simulated annealing algorithm. Uniform design method was used to convert the problem of parameter establishment into the experimental design of multi-factor and multilevel and reduce the work load of experiment greatly of simulation. Simulation results show that the proposed method is feasible and valid.