摘要
发动机缸盖加工过程中,进排气孔的导管和座圈装配质量直接影响整机动力性能。考虑到技术和成本问题,目前国内发动机厂的导管座圈装配设备都没有压力位移监控功能,发动机质量得不到可靠保障。采用德国STAMO压力位移传感器和台湾研华模拟量采集卡PCI1710实现压力位移数据采集,数据处理及监控软件采用VB编程语言开发。通过研华数字量采集卡PCI1713实现与PLC控制系统信号交互。软件运行在研华公司工控机IPC610上。
In the assemble process of motor cylinder, the pipe and ring assemble have a important influence on the motor power performance. Considering the problems of technique and capital, the press and size sensor are not involved in the control system for the engine manufacture of china. The control system consists two parts, one is PLC control system and the other is data collecting and monitoring system. Data collecting and monitoring system are based on IPC610, STAMO press sensor and PCI1710 card accomplish the data collection, and the monitoring software is developed in VB. ET200M and digital colleting card PCI1713 are used to communication between the PLC control system and the data collecting system.
出处
《科学技术与工程》
2009年第9期2506-2509,共4页
Science Technology and Engineering
关键词
导管座圈装配
PLC控制
数据采集
pipe and ring assemble equipment PLC control system data collection