期刊文献+

H13钢表面反应火焰喷涂三元硼化物金属陶瓷涂层的组织和性能 被引量:11

Microstructures and Properties of Mo_2FeB_2 Cermets Coating by Reactive Flame Spraying on the Surface of H13 Steel
下载PDF
导出
摘要 采用反应火焰喷涂方法在H13钢表面制备的Mo2FeB2三元硼化物金属陶瓷涂层,分析了涂层的显微组织、显微硬度、耐磨性能及抗热疲劳性能。结果表明,经过火焰喷涂获得Mo2FeB2三元硼化物金属陶瓷涂层,其显微硬度达到1200HV0.1,具有良好的耐磨性能和抗热疲劳性能。 Mo2FeB2 cermets coating on the surface of H13 steel by reactive flame spraying were prepared. The microstructure, microhardness and wear resistance of the coating were analyzed. The results indicate that the Mo2FeB2 cermets coating aggregation powders by reactive flame spraying is obtained. The coating with microhardness of 1200 HV0.1 is favorable to wear resistance and thermal fatigue resistance
出处 《中国表面工程》 EI CAS CSCD 北大核心 2009年第2期49-52,共4页 China Surface Engineering
基金 湖北省自然科学基金项目(2007ABA047)
关键词 H13钢 反应火焰喷涂 金属陶瓷 Mo2FeB2三元硼化物 耐磨性能 H13 steel reactive flame spraying cermets Mo2FeB2 ternary boride wear resistance
  • 相关文献

参考文献4

二级参考文献13

  • 1Takagi K,Komai M and Matsuo S.Powder metallurgy proceeding of world congress[C].PM,94,Paris,European Powder Metallurgy Association,1994:227-234.
  • 2Takagi K,Ohira S,Ide T,et al.New P/M iron containing multiple boride base hard alloy[J].Moden Developments in Powder Metallurge,1985,16:153-166.
  • 3Takagi K, Komai M and Matsuo S. Development of ternary boride base ceramics [ A ]. Powder metallurge proceeding of world congress[C].PM'94, Paris, European Powder Metallurge Association, 1994:227-234.
  • 4Takagi K, Ohira S, Ide T, et al. New multiple-boride base alloy [ J ]. MPR, 1987 ( 7/8 ) :483-490.
  • 5Takagi K,Komai M,Watanbe T,et al. Effects of Mo and Cr contents on the properties and phase formation of iron molybdenum boride base hard alloys [ J ]. Powder Metal International, 1987,19 ( 5 ) :30-33.
  • 6Takagi K, Watanbe T, et al. Effects of molybdenum and carbon on the properties of iron molybdenum boride hard alloys [J]. The International Journal of Powder Metallurgy, 1986, 22(2) :91-95.
  • 7Takagi K, Komai M, Watanbe T, et al. Effects of Ni on the mechanical properties of Fe, Mo, boride hard alloys [ J ]. The International Journal of Powder Metallurgy, 1987,23 ( 3 ) : 157-161.
  • 8German R M,Hwang K S,Madan D S. Analysis of Fe-Mo-B sintered alloys [ J ]. Powder Metal International, 1987, 19 (2) :15-18.
  • 9Ide Tsuneyuki, Ando Teiichi. Reaction sintering of an Fe-6wt pct B-48wt pct Mo alloy in the presence of liquid phases [ J]. Metallurgical Transactions A, 1989,20A( 1 ):17-24.
  • 10王永国,李兆前,邓建新,张涛,刘福田.反应烧结法制备三元硼化物基陶瓷的研究[J].陶瓷学报,2000,21(4):209-213. 被引量:5

共引文献14

同被引文献124

引证文献11

二级引证文献54

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部