期刊文献+

一种新型双定子三自由度超声波电机特性研究 被引量:8

Research on a Novel 3-DOF Ultrasonic Motor with Two Cylinder Stators
下载PDF
导出
摘要 提出了一种新的方法对圆柱定子三自由度超声波电机施加预压力,用两个定子夹持一个转子来驱动电机。这种方法通过两个定子夹持一个转子,并施加一定的预压力,然后在两个转子上同时施加激励电压,由两个定子同时驱动转子,不仅能够施加较大的预压力,而且还能够减少预压力引起的摩擦力损耗,提高了电机的输出力矩。给出了电机结构及其优化方法,最后对电机输出特性进行了测量,验证了该方法的正确性。 Presented a novel 3-DOF ultrasonic motor with two cylinder stators clamped. Two cylinder stators were used to grip the sphere rotor, and clamp force was applied to the stators instead of rotor. With this novel method, the pre-pressure of 3-DOF cylinder ultrasonic motor between the stators and the rotor was enlarged , and the output moment was also increased largely. The two stators were applied by cross excitation alternating voltage respectively, and the driving forces of the stators were in the same direction. So the output moment was enlarged as well as the pre-pressure enlarged.
出处 《微电机》 北大核心 2009年第4期27-29,共3页 Micromotors
基金 国家自然科学基金项目(50277006 60605024) 博士学科点专项科研基金项目(20070286015) 教育部科学技术研究重点项目(107052)
关键词 超声波电机 双定子 三自由度 输出特性 测量 Ultrasonic motor Two cylinder stators 3-DOF Output moment Measurement
  • 相关文献

参考文献11

  • 1邹继明,崔淑梅,程树康.多自由度(旋转)电动机的发展[J].高技术通讯,2000,10(10):103-105. 被引量:13
  • 2郭吉丰,傅平.多自由度球形超声波电机的研究进展[J].电工电能新技术,2005,24(2):65-68. 被引量:22
  • 3T. Shigeki, S. Shigeru, Z. Guoqiang, et al. Multi Degree of Freedom Spherical Ultrasonic Motor[C]. IEEE International Conference on Robots and Automation, 1995: 2935-2940.
  • 4Antoine Ferreira, Patrice Minotti, Patrice Le Moal. New Multidegree of Freedom Piezoelectric Micromotors for Micromanipulator Applications[J]. 1995 IEEE Ultrasonics symposium: 417-422.
  • 5T. Amano, T. Ishii, K. Nakamura, et al. An Ultrasonic Actuator With Multi-degree of Freedom using Bending and Longitudinal Vibrations of a Single Stator [ C ]. Proc. IEEE Ultrasonics Symposium, 1998, 1: 667-670.
  • 6K. Takemura, T. Maeno. Design and Control of an Ultrasonic Motor Capable of Generating Multi-DOF Motion [ J ]. IEEE/ ASME Transactions on Mechatronics, 2001, 6(4): 499-506.
  • 7M. Aoyagi, S. P. Beeby. A Novel Multi-degree-of-freedom Thick-film Ultrasonic Motor. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control[J]. 2002, 49(2) : 151-158.
  • 8金龙,胡敏强,顾菊平,莫岳平,徐志科,王心坚.一种新型圆柱定子3自由度球形压电超声电机[J].东南大学学报(自然科学版),2002,32(4):620-623. 被引量:19
  • 9R. Rajkumar, T. Nogal. A New Method of Improving the Torque of a Travelling Wave Ultrasonic Motor [C]. Proceedings of the 1999 IEEE/ASME, International Conference on Advanced Intelligent Mechatronics, 1999: 109-113.
  • 10李志荣,赵淳生,黄卫清.圆柱形多自由度超声电机特性的实验研究[J].中国机械工程,2005,16(17):1567-1570. 被引量:4

二级参考文献26

  • 1苏仲飞,刘昌旭,韦平顺,高维彦,申存,郑春萍.机器人关节用三自由度球形直流伺服电机[J].高技术通讯,1994,4(8):16-18. 被引量:12
  • 2诸静.机器人球关节电机及其控制器研究[J].中国电机工程学报,1994,14(5):27-32. 被引量:9
  • 3黄声华,陶醒世,林金铭.三自由度球形电机的发展[J].电工电能新技术,1989,8(1):6-11. 被引量:15
  • 4S Toyama.Developmentof arm with 3 DOF spherical ultrasonic motor [A].Jap.Proceeding of Robotics Society [C].Japan,1997.689-690.
  • 5Tomoaki Yano,et al.Development of multi DOF ultrasonic motor with longitudinal and torsional vibration[J].J of the Robotics Society of Japan,1998,16(8): 1115-1122.
  • 6S Toyama,Zhang Guoqiang,O Miyoshi.Development of new generation sphericalultrasonic motor [A].Proc.1996 IEEE International conf.Robotics & Automation [C].Minnesota,USA,1996.2871-2876.
  • 7S Toyama,et al.Development of an actuator for a robotic manipulator with ultrasonic motor-2nd development of prototypal spherical ultrasonic motor [J].J of the Robotics Society of Japan,1995,13(2): 235-241.
  • 8E Purwanto,S Toyama Control method of a spherical ultrasonic motor [A].Proc.2003 IEEE/ASME International Conf.Anvanced Intelligent Mechatronics [C].2003.1321-1326.
  • 9E Purwanto,S Toyama,et al.Development of an ultrasonic motor as a fine-orienting stage [J].IEEE Trans.on Robotics and Automation,2001,17(4): 464-471.
  • 10Motoyoshi Kawai,et al.Research of a spherical motor with 3 DOF driven by ultrasonic linear actuators[J].JSPE,1993,405-410.

共引文献45

同被引文献73

引证文献8

二级引证文献32

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部