期刊文献+

高电阻率收尘极板的实验研究

Exploration of High Resistivity Collection Plates
下载PDF
导出
摘要 用电阻率较高的非金属材料制作电收尘器的收尘极板收尘,对于比电阻低于10~4Ω·cm的烟尘,能有效地克服积尘的跳跃式二次飞扬。对于比电阻为10~8Ω·cm左右的氧化铝粉尘,在工业现场实验,收尘效率达98.5%;对于比电阻为10^(13)Ω·cm左右的莹石粉尘,采用比电阻为10^(10)Ω·cm左右的混凝土极板,实验室实验,电晕电流正常,未观察到反电晕现象,推断存在“受抑制”的尘层间隙放电。 The metaoid material collection plates with relatively high resistivity in ESP(Electrostatic Precipita-tor) are applicable to the dust resistivity below 104Ωcm dust. they can effectively restrain the collected dust from bringing about skipped style reentrainment. To the aluminum oxide dust with resistivity about 108Ωcm, on - site experiments collection efficiency is 98. 5 percent. To the fiar - spar dust with resistivity about 1013Ωcm, when using concrete collection plates with resistivity about 1010Ωcm in laboratory experiments. the corona current is normal and the back corona phenomena never beobserved. From the study a conclusion can be deduced that the restrained dust intermittently discharge exists.
出处 《工业安全与防尘》 1998年第4期6-9,共4页
关键词 静电控制 粉尘 电阻率 电收尘器 收尘极板 Electrostatic precipitator High resistivity Plate
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部