摘要
为了获得高质量的激光等离子体光谱,以土壤样品为靶,实验研究了不同制备条件下的样品对激光诱导等离子体辐射的影响。结果表明,随着制备样品所用压强从8MPa到20MPa的增加,样品密度增大,等离子体的发射光谱强度和信背比都逐渐提高。当分别用100#、360#、600#砂纸处理样品表面后,发现600#砂纸打磨样品可以获得更高质量的激光光谱。所以,样品制备条件是影响激光光谱质量的重要因素之一。
In order to obtain high quality laser-induced plasma spectra, the influence of different conditions during soil samples preparation on the radiation generated from the laser-induced plasma was investigated. The results show that the density was increased and the line intensities and signal-to-hackground ratio were enhanced with the pressure rising from 8MPa to 20MPa for sample preparation. After polishing the surface of the sample by 100 # ,360 # and 600 # sandpaper, it was found that the high-quality laser spectra could be obtained with the 600 # sandpaper. Consequently, it has been identified that the condition of sample preparation is one of the most important factors that affect the quality of laser spectra.
出处
《应用激光》
CSCD
北大核心
2009年第2期161-164,共4页
Applied Laser
基金
河北省自然科学基金资助项目(项目编号:A2006000951)
关键词
激光诱导等离子体
样品制备条件
土壤
光谱强度
信背比
laser-induced plasma
preparation conditions
soil
spectral intensity
signal-to-background ratio