基于Hypermesh和ANSYS的驱动桥有限无分析研究

Finite element analysis and research for drive axle based on Hypermesh and ANSYS

采用Pro／E对桥壳进行三维建模，并导人Hypermesh中进行有限元分析的前处理工作，最后将导出的文件输入ANSYS中，分别进行静力、模态和谐响应分析。通过分析验证此桥设计安全合理。

Using Pro/E to make three dimensional modeling for axle housing, and leads in Hypermsh to make pretreatment job for finite element,finally inputs the exported documents into ANSYS,makes analysis for static force,mode and harmonic response.Verifies the axle design is safe and reasonable by analysis.