浅谈烧结制粒润滑系统技术改造

Brief Talk on Improvement of Sintering Granulation Lubrication System

针对制粒系统存在振动大、油管断裂、加油时间长等问题进行了改造,采取了在每台制粒元盘上安装一台手动干油泵、更换润滑油脂、安装一台干油控制系统,由程序来控制电动集中润滑系统等改进措施。改造后,保证了制粒系统良好润滑,提高了烧结矿质量和产量,收到了良好效果。

Improvement is carried out in addressing the problems of big vibration,grease pipe breakage and long oil filling time in granulation system,the installation of a manual grease pump on each granulation disk,the exchange of lubricating grease,the installation of grease control system and utilizing the program to control the electric central lubrication system. After modification,the granulation system is well lubricated and the sinter quality and output are raised.Satisfactory effects are achieved.