期刊文献+

15kV柔性旁路电缆的不停电抢修作业技术 被引量:28

Bypass Technique of Living-work On-site with 15 kV Flexible Power Cable for Power Urgent Repaired
下载PDF
导出
摘要 为保证城市电网安全、稳定、经济运行,介绍了应用8.7/15kVXLPE柔性电力电缆、自锁定快速插拔式电缆中间接头和电缆终端的最新研究成果并与高低压电器单元、保护单元和机动车辆协同构成的旁路作业不停电抢修系统。试验研究和抢修实践表明:该系统可大幅提高城市供电公司机动灵活地处置自然灾害和电网突发事故的应急应变能力,大幅提高不停电作业法的技术水平和技术装备水平,具有应急应变、机动灵活、适用范围广、安全可靠性高等优点,从而进一步增强和完善城市配电系统主动型、对策型、协调控制型的安全防御体系,有效保障城市电网安全、稳定、可靠运行。 Flexible power cable, fast slide-in cable joints and terminations as well as vehicle with 15 kV high voltage unit, 400 V low voltage unit, overload protection and line on/off control unit were applied to assemble a bypass technique system of living-work on-site for power urgent reparation. The vehicle loading the bypass technique sys- tem was adopted in urgent repairing work. Faculative length of 15 kV flexible cables which were connected by fast slide-in cable joints and terminations would be utilized to form a temporary distribution route for supplying the user with electric power continuously instead of fault line. At the same time, power cut is not needed when the repairers operate on-site safely and handily with the help of this bypass system. In fact, all the emergency reparation on the fault line would be done in a state of no electricity for electric power was transported through the bypass technique system of temporary distribution line. The results of research and emergency repairing practice show that this bypass technique has greatly improved the emergency repairing ability of urban power distribution whenever or wherever. Any power fault, specially user's power equipment is damaged during nature disaster, could be repaired and/or replaced quickly with temporary power supply continuously by this bypass technique system.
出处 《高电压技术》 EI CAS CSCD 北大核心 2009年第4期949-953,共5页 High Voltage Engineering
关键词 柔性电力电缆 旁路技术 现场带电作业 插拔式电缆 中间接头 应急抢修 flexible power cable bypass technique living-work on-site slide-in cable joint slide-in cable termination emergency repairing
  • 相关文献

参考文献17

  • 1张锦秀,蓝耕,范云刚,周先义,李发根,罗彦,蔡志国.柔性电缆插拨式快速终端和接头绝缘结构分析[J].高电压技术,2005,31(1):25-26. 被引量:22
  • 2张锦秀,蓝耕,范云刚,周先义,李发根,蔡志国,罗彦.带电旁路作业用插拔式快速电缆终端和接头[J].高电压技术,2005,31(5):50-51. 被引量:11
  • 3Letian Teng,Jinxiu Zhang,Yan Luo.Study on insulation structure of fast slide-in termination and joint for 15 kV power cable applying to living-work on-site[C]//Proceedings of Electrical Insulation Conference.Indianapolis,USA:[s.n.],2005.
  • 4张锦秀 蓝耕 范云刚 等.适用于带电作业旁路电缆的新型插拔式快速终端和接头.广东电缆技术,2005,(2):39-42.
  • 5张锦秀,蓝耕,范云刚.等.柔性电缆插拔式快速终端和接头绝缘结构分析[C]//全国第七次电力电缆运行经验交流会论文集.杭州,2004:183-190.
  • 6罗俊华,蓝剑,王恒,等.15 kV柔性电力电缆应用于旁路作业不停电抢修技术研究[C]//全国第八次电力电缆运行经验交流会论文集.杭州,2008:372-377.
  • 7Jones S,Bucea G,McAlpine A.Condition monitoring system for transgrid 330 kV power cable[C]//2004 International Conference on Power System Technology.Singapore:[S.n.],2004:21-24.
  • 8Junhua Luo,Yigang Liu.Yan Luo.Temperature calculation of power cable conductor in real time[C]//Proceedings of Electrical Insulation Conference.Indianapolis,USA:[s.n.],2005:23-26.
  • 9罗俊华,周作春,李华春,罗旻.电力电缆线路运行温度在线检测技术应用研究[J].高电压技术,2007,33(1):169-172. 被引量:72
  • 10刘毅刚,罗俊华.电缆导体温度实时计算的数学方法[J].高电压技术,2005,31(5):52-54. 被引量:88

二级参考文献44

共引文献256

同被引文献128

引证文献28

二级引证文献115

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部