从摩擦学的角度探讨提高挤出机生产能力的途径
被引量：3
摘要
根据建立的混合模型讨论摩擦力的影响因素，提出提高挤出机生产能力的新途径：（１）挤出机温度控制装置采用温水冷却，使挤出机处于最佳工作状态；（２）通过提高挤出压力，使实际接触面积趋于轮廓接触面积，从而使粘附摩擦力增大并趋于稳定；（３）机筒内壁开槽或刻花纹，方向垂直于螺纹输送角，以浅细的多头螺纹为宜。
出处
《橡胶工业》
CAS
北大核心
1998年第2期106-108,共3页
China Rubber Industry
同被引文献15
-
1Evans R E. The measurement of the coefficient of friction of polymer pellets under extrusion (J). Journal of Testing and Evaluation, 1975,13(2) :133-136.
-
2Hassam H. Effect of slip at the barrel/melt interface on the efficiency of a single—screw melt—fed extruder[J]. Plastics and Rubber Processing, 1977,2(1) :3-5.
-
3Ellwood H. Determination of friction of rubber over a solid surface at low sliding rates[J]. Kutshchuk Gummi Kunstsoffe, 1981,34(4) :125-131.
-
4Schallamach A. Recent advance in knowledge of rubber friction and tire wear[J]. Rubber Chemistry and Technology, 1986 ,11 (1) :209-244.
-
5Vinogradov G V, Yel kin A L, Bartenev G ,M, et al. Effect of normal pressure on temperature and rate dependence of elastomer friction in the glass transition region[J]. Wear, 1973.23(1) :33-38.
-
6Evans R E. The measurement of the coefficient of friction of polymer pellets under extrusion [J]. Journal of Testing and Evaluation, 1975,13(2):133-136
-
7Hassam H. Effect of slip at the barrel/melt interface on the efficiency of a single-screw meltfed extruder[J]. Plastics and Rubber processinfg, 1977,2(1):3-5
-
8Ellwood H. Determination of friction of rubber over a solid surface at low sliding rates[J]. Kutshchuk Gummi Kunstsoffe, 1981,34 (4): 125 -131
-
9Schallamach A. Recent advance in knowledge of rubber friction and tire wear[J]. Rubber Chemistry and Technology, 1986,41(1):209-244
-
10Vinogradov G V, Yel"kin A L, Bartenev G M,et al. Effect of normal pressure on temperature and rate dependence of elastomer friction in the glass transition region[J]. Wear, 1973,23 (1):33-38
引证文献3
-
1李勇,陈树新.橡胶与金属间的摩擦特性对其加工性能的影响[J].世界橡胶工业,2003,30(6):34-37.
-
2李勇,于明进,李亚莉,李荣.生胶摩擦性能对密炼机工作的影响[J].橡胶工业,2000,47(1):33-36.
-
3李勇.橡胶的摩擦性能对其加工的影响[J].特种橡胶制品,2004,25(1):33-36. 被引量：1
-
1侯珍秀,赵永平,祁添,侯大为.多功能注射机模具温度控制装置的设计[J].机械工程师,1994(4):15-16. 被引量：1
-
2王进文.高能效弹性体注压机[J].世界橡胶工业,2013,40(2):43-46.
-
3姚武,张超.碳纤维水泥基材料与电极的接触电阻[J].材料导报,2007,21(4):104-106. 被引量：6
-
4马晓.一种轮胎挤出机温度控制装置及其控制方法[J].轮胎工业,2013,33(6):344-344.
-
5许国柱.6000kN注射式胶囊硫化机的创新设计[J].科技信息,2013(19):111-111.
-
6专利文摘[J].橡塑技术与装备,2012,38(2):63-64.
-
7水内压支持注射成型技术生产热塑性弹性软管[J].橡塑机械时代,2009,21(11):19-19.
-
8李勇,于明进,李亚莉,李荣.生胶摩擦性能对密炼机工作的影响[J].橡胶工业,2000,47(1):33-36.
-
9李勇.结构、工艺、材料对密炼机工作的影响[J].青岛化工学院学报（自然科学版）,2000,21(1):58-61.
-
10刘兵.带上下温度限制的温控装置[J].无线电,2008(9):26-27.
