摘要
采用沥青碳纤维增强多官能度环氧树脂,制得马丁耐热可达200℃,水润滑下摩擦系数为0.125,比磨耗率为5.0×10^(-8)mm^3/(N·m)的碳纤维增强环氧模塑料。
The carbon fiber reinforced epoxy molding compound was prepared with martens temperature above 200℃. friction coefficient 0. 125 and specific wear rate 5. 0×10^(-8) mmV(N·m). When lubricated by water using pitch carbon fiber reinforced multifunctional epoxy resin.
出处
《工程塑料应用》
CAS
CSCD
1998年第3期5-6,共2页
Engineering Plastics Application
关键词
碳纤维
环氧模塑料
环氧树脂
增强塑料
carbon fiber reinforced epoxy molding compound, epoxy resin system, thermal resistance, mechanical property, friction and wear properties